OVclamp
About the OVclamp PCB
OVclamp is an open source PCB design by aartech-dev, published on GitHub. It is a 2-layer board measuring 27.4 × 16.7 mm, with 9 components from 9 distinct parts.
By type, the board carries 3 resistors, 2 transistors, 2 test points and 2 diodes.
From the project
A design for a slot car eCom (electronic speed controller).
This repo contains a KiCad design, documentation and ancillary artifacts for a slot car brushless motor electronic commutator or "eCom", also known as an Electronic Speed Controller (ESC).
If you are looking for our latest board - the Remora™ 2 - you find it here: https://github.com/aartech-dev/Remora2 Please note this is in a different github organization to where we'll eventually move this repo.
OVclamp bill of materials (BOM)
9 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C2910189 SS8550 | SOT-23.kicad_NoSilkScreen_mod | Q1 |
| 1 | C510332 PSMN1R5-30BLE | TO-263-2.kicad_ReducedSilkscreen_mod | Q2 |
| 1 | pos | SolderWirePad_1x01_SMD_5mmx5mm | TP1 |
| 1 | neg | SolderWirePad_1x01_SMD_5mmx5mm | TP2 |
| 1 | C2991969 SZYY0402R | LED_0402_1005Metric_ReducedSilkScreen | D1 |
| 1 | C435910 BZT52C12 | D_SOD-123F | D2 |
| 1 | C25744 1k5 | R_0402_1005Metric_NoSilkScreen | R1 |
| 1 | C25879 220R | R_0402_1005Metric_NoSilkScreen | R2 |
| 1 | C25900 1k0 | R_0402_1005Metric_NoSilkScreen | R3 |
OVclamp design files
The KiCad project lives in the aartech-dev/slot-car-ecom repository on GitHub; these links point at the commit this page was built from.
OVclamp: common questions
How big is the OVclamp PCB?
The OVclamp measures 27.4 × 16.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the OVclamp?
9 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the OVclamp design files?
From the aartech-dev/slot-car-ecom repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the OVclamp design in my own project?
The repository has no license, so all rights stay with aartech-dev. Use it as a reference, and ask the author before reusing the design.
