Open source PCB designs you can simulate
48,110 boards
Every public KiCad project we can find on GitHub, with its processor, full parts list and a render of the board. Any of them can be brought up in simulation: open one and run firmware on it before you order a single PCB.
View base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kRaspberry Pi
Open source rover
nasa-jpl
220 × 178 mm144 parts2LApache-2.09.7kESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kAnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0kAnyon e motherboard
byrantech
133 × 92 mm258 parts6LMIT4.3kChainlinkDriverTester
scottbez1
198.1 × 95.3 mm123 parts2LApache-2.04.2kAVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kSTM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9kSTM32
Glider
Modos-Labs
90 × 80 mm356 parts4LCERN-OHL-S-2.02.7kRP2040/RP2350
Sofle Pico
josefadamcik
145.4 × 116.3 mm98 parts2LMIT2.5kRaspberry Pi
Iot
dotnet
56 × 65 mm24 parts2LMIT2.4kRP2040/RP2350
Pro V2
kata0510
290.1 × 130 mm270 parts2LMIT2.3kFPGA
Base board
GlasgowEmbedded
80 × 49 mm222 parts4L0BSD2.2k- schematic only · 1 parts
Ubertooth
greatscottgadgets
1 partsGPL-2.02.1k Sweepbling lp
davidphilipbarr
216.9 × 86.9 mm46 parts2LSHL-2.12.1kNordic nRF
TOTEM
GEIGEIGEIST
258.8 × 94.4 mm85 parts2LCERN-OHL-P-2.02.0kESP32
EinkPDA keyboard
TalismanDesign
95 × 55.5 mm128 parts4LApache-2.02.0kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k- schematic only · 414 partsNXP
Illacceptanything
illacceptanything
414 partsMIT2.0k RP2040/RP2350
ControlBoard v1
0x23
64 × 85 mm21 parts2LMIT1.9kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kSTM32
AxxSolder
AxxAxx
39 × 82.5 mm122 parts2LGPL-3.01.7kRP2040/RP2350
Hid remapper
jfedor2
100 × 100 mm124 parts2LMIT1.7kPIC
Pslab hardware
fossasia
99 × 53.3 mm187 parts4LApache-2.01.7kSTM32
LibreVNA
jankae
122 × 98 mm592 parts6LGPL-3.01.6kRP2040/RP2350
Picodvi
Wren6991
50 × 30 mm51 parts4LBSD-3-Clause1.5kUSB armory Mk II
usbarmory
55.6 × 19.6 mm180 partsNo license1.5kNordic nRF
Pixl.js
solosky
40 × 23 mm45 parts4LGPL-2.01.4k- schematic only · 104 parts
Konnect
mixelpixx
104 partsAGPL-3.01.4k STM32
AIOC
skuep
21 × 31.5 mm47 parts2LMIT1.4kESP32
Bitaxe
skot
56.5 × 99.8 mm86 parts4LCERN-OHL-S-2.01.4kFPGA
Thunderscope Rev5.3
EEVengers
122.5 × 103.5 mm817 parts6LMIT1.3k
About these open source PCB designs
Every board here is a published hardware project: a public GitHub repository with KiCad design files and a bill of materials. HardLabs reads those files directly — the board outline for its size, the copper layers, every footprint for the parts list — and draws the render from the layout itself, so what you see is the design as committed rather than a product photo.
Boards are indexed by the microcontroller they are built around, by what they are for, and by every IC and module on them. That makes the gallery a quick way to find a reference design: look up a part number to see how other engineers power, decouple and connect it.
Using an open source board as a reference design
- Find boards built on your chip or with the part you are designing around.
- Compare their size, layer count and bill of materials, and open the KiCad files on GitHub.
- Check the license before reusing any of the design.
- Simulate the firmware on HardLabs to test your changes before you order a PCB.
Open source PCB designs: common questions
What is an open source PCB?
A printed circuit board whose design files — schematic, layout and bill of materials — are published for anyone to study and, depending on the license, to modify and manufacture.
Are these PCB designs free to use?
It depends on each project's license. Open hardware licenses such as CERN-OHL and CC BY-SA, and software licenses such as MIT, allow reuse on their terms; a repository with no license keeps all rights with its author. Every board page shows its license.
What design files do the boards come with?
They are KiCad projects: the .kicad_pcb layout and the schematic (or a netlist from older KiCad versions), plus a bill of materials, usually a CSV. Each board page links to those files in the original GitHub repository.
How do I find boards that use a specific part?
Search for the part number, or open the part's page from the list of parts. It shows every board built with that part and the parts most often used alongside it.
How many boards are there, and how often is the list updated?
48,110 boards from 26,315 repositories today. New projects are found and added every few days.
Can I test a board's firmware before ordering the PCB?
Yes. HardLabs builds a simulation of a board from its netlist and BOM, so you can boot and debug firmware against it with no hardware on your desk.