MOD-10-Ripple-Counter
About the MOD-10-Ripple-Counter PCB
MOD-10-Ripple-Counter is an open source PCB design by abhinandann, published on GitHub. It is a board, with 19 components from 10 distinct parts.
Other key parts include the plot_v1, mod_10, adc_bridge_2 and dac_bridge_4. By type, the board carries 9 ICs and 1 crystal.
From the project
This repository presents the implementation of MOD-10 Ripple Counter, which is interfaced with Astable multivibrator for pulse input to the counter. The design is done using Opensource EDA tool eSim.
A Mod-10(decade) counter is a sequential circuit which counts from 0(0000) to 9(1001) after 9th pulse i.e.; on the 10th pulse it is resets to 0. Input to the decade counter is given through Op-amp Multivibrator which generates clock pulse to the counter.
eSim is an open source EDA tool for circuit design, simulation and analysis , developed by FOSSEE Team at IIT Bombay. It is an integrated tool build using open source softwares such as KiCad, Ngspice and GHDL. More details on eSIM tool can be found here
Main components on the MOD-10-Ripple-Counter
MOD-10-Ripple-Counter bill of materials (BOM)
19 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | plot_v1 | U1, U4, U6, U7, U8, U9 | |
| 1 | mod_10 | U2 | |
| 1 | adc_bridge_2 | U3 | |
| 1 | dac_bridge_4 | U5 | |
| 1 | avsd_opamp | X1 | |
| 1 | sky130_fd_pr__cap_mim_m3_1 | SC1 | |
| 3 | sky130_fd_pr__res_generic_pd | SC2, SC3, SC4 | |
| 1 | SKY130mode | scmode1 | |
| 3 | DC | R1 | v1, v2, v3 |
| 1 | pulse | R1 | v4 |
MOD-10-Ripple-Counter design files
The KiCad project lives in the abhinandann/MOD-10-Ripple-Counter repository on GitHub; these links point at the commit this page was built from.
MOD-10-Ripple-Counter: common questions
How many components are on the MOD-10-Ripple-Counter?
19 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the MOD-10-Ripple-Counter design files?
From the abhinandann/MOD-10-Ripple-Counter repository on GitHub, which has a netlist; the links under Design files point to each one.
Can I use the MOD-10-Ripple-Counter design in my own project?
The repository has no license, so all rights stay with abhinandann. Use it as a reference, and ask the author before reusing the design.