MULTICORE-ESdUDO-ROJO
About the MULTICORE-ESdUDO-ROJO PCB
MULTICORE-ESdUDO-ROJO is an open source PCB design by AtlasFPGA, published on GitHub. It is a 2-layer board measuring 81 × 67.9 mm, with 41 components from 23 distinct parts.
By type, the board carries 17 connectors, 9 capacitors, 8 jumpers, 4 resistors and 1 switch.
From the project
Diseñar la placa - ¡Créalo tu mismo! De coste más reducido para la Fpga CYC1000, con una BLUEPILL STM32F103C8T6
Se muestra el multicore en desarrollo para cyc1000 de arrow/trenz el cual aloja una fpga Cyclone 10 LP de intel con 25kles y 66 bloques de Bram de 9Kbytes, tiene integrada una memoria de celular de bajo consumo y reducida latencia, siendo una sdram a 166Mhz con 8MBytes en un bus de 16bits, La familia Cyclone 10 LP permite implementar modelos que superan los 400Mhz en sus diseños, manteniendo un bajo consumo. También hay que disponer de una bluepill con un STM32F103C8Tx, posee 64Kbytes de Flash y 20Kbytes de sram, con una unidad de proceso ARM cortex M3 de 32bit funcionando a 72Mhz.
MULTICORE-ESdUDO-ROJO bill of materials (BOM)
41 components, 23 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | Conn_01x14 | PinSocket_1x14_P2.54mm_Vertical | J1, J4 |
| 2 | Conn_01x03 | PinSocket_1x03_P2.54mm_Vertical | J2, J14 |
| 1 | Conn_01x06 | PinSocket_1x06_P2.54mm_Vertical | J3 |
| 1 | Conn_02x06_Odd_Even | PinSocket_2x06_P2.54mm_Vertical | J5 |
| 1 | Conn_01x28_Male | PinHeader_1x28_P2.54mm_Horizontal | J6 |
| 2 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J7, J16 |
| 1 | BLUEPILL_IZQ | PinSocket_1x20_P2.54mm_Vertical | J8 |
| 1 | BLUEPILL_DER | PinSocket_1x20_P2.54mm_Vertical | J9 |
| 1 | Conn_01x09_Male | PinHeader_1x09_P2.54mm_Vertical | J10 |
| 1 | Conn_Coaxial | rca_combined | J11 |
| 2 | Conn_01x06 | PinHeader_1x06_P2.54mm_Vertical | J12, J13 |
| 1 | Conn_01x02_Male | PinSocket_1x02_P2.54mm_Horizontal | J15 |
| 1 | USB-A1HSW6 | OST_USB-A1HSW6 | P1 |
| 3 | SolderJumper_2_Bridged | SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mm | JP1, JP2, JP5 |
| 5 | SolderJumper_2_Open | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP3, JP4, JP7, JP8, JP9 |
| 1 | 1000 | Potentiometer_Bourns_3339H_Vertical | RV1 |
| 1 | 150 | Potentiometer_Bourns_3339H_Vertical | RV2 |
| 1 | SW_Push | SW_PUSH_6mm | SW1 |
| 1 | 100nF | CP_Radial_D6.3mm_P2.50mm | C1 |
| 8 | 22pF | CP_Radial_Tantal_D4.5mm_P2.50mm | C2, C3, C4, C5, C6, C7, C8, C9 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 15k | R_Axial_DIN0309_L9.0mm_D3.2mm_P2.54mm_Vertical | R1, R2 |
| 1 | 750-1500 | R_Axial_DIN0309_L9.0mm_D3.2mm_P2.54mm_Vertical | R3 |
| 1 | 80 | R_Axial_DIN0309_L9.0mm_D3.2mm_P2.54mm_Vertical | R4 |
MULTICORE-ESdUDO-ROJO design files
The KiCad project lives in the AtlasFPGA/MULTICORE-ESdUDO-ROJO repository on GitHub; these links point at the commit this page was built from.
MULTICORE-ESdUDO-ROJO: common questions
How big is the MULTICORE-ESdUDO-ROJO PCB?
The MULTICORE-ESdUDO-ROJO measures 81 × 67.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MULTICORE-ESdUDO-ROJO?
41 components, from 23 distinct parts. The full bill of materials is listed on this page.
Where can I download the MULTICORE-ESdUDO-ROJO design files?
From the AtlasFPGA/MULTICORE-ESdUDO-ROJO repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the MULTICORE-ESdUDO-ROJO design in my own project?
The repository has no license, so all rights stay with AtlasFPGA. Use it as a reference, and ask the author before reusing the design.