PMOD-SPI-Memory
About the PMOD-SPI-Memory PCB
PMOD-SPI-Memory is an open source PCB design by atoomnetmarc, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 49.5 × 20.3 mm, with 6 components from 6 distinct parts.
Other key parts include the SPI Memory. By type, the board carries 2 resistors, 1 IC, 1 connector, 1 diode and 1 capacitor.
From the project
SPI Memory PMOD, RAM, ROM, Flash
This is a SPI PMOD board and holds your SPI memory chip.
Typical footprints used for SPI memory like DIP-8, SOIC-8 and SOP-8 will fit on the Frankenstein-8 footprint.
Tested with: - APS6404L-3SQR, 8MiB SPI PSRAM - W25Q64, 8MiB SPI FLASH
My Kicad library is used in this project.
Main components on the PMOD-SPI-Memory
PMOD-SPI-Memory bill of materials (BOM)
6 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SPI Memory | Frankenstein-8 | U1 |
| 1 | Pmod peripheral SPI | PinHeader_1x06_P2.54mm_Horizontal | J1 |
| 1 | Blue | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 100R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
PMOD-SPI-Memory design files
The KiCad project lives in the atoomnetmarc/PMOD-SPI-Memory repository on GitHub; these links point at the commit this page was built from.
PMOD-SPI-Memory: common questions
How big is the PMOD-SPI-Memory PCB?
The PMOD-SPI-Memory measures 49.5 × 20.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PMOD-SPI-Memory?
6 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the PMOD-SPI-Memory design files?
From the atoomnetmarc/PMOD-SPI-Memory repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PMOD-SPI-Memory design in my own project?
Yes, under the terms of its Apache-2.0 license, which atoomnetmarc chose for the repository.