Kino d4
About the Kino d4 PCB
Kino d4 is an open source PCB design by b5463, published on GitHub under the Custom license license. It is a 4-layer board measuring 117 × 70 mm, with 0 components from 0 distinct parts.
From the project
Open-source four-lens digital camera with synchronized capture, original-frame storage, and a USB control workbench.
Status: Phase 1 architecture baseline — NOT FOR FABRICATION
The KiCad 10 workspace for the custom KINO D4 mainboard.
Phase 1 settles the questions that can be settled on paper: how the system divides into sheets, what the measured Guition JP1 header actually carries, what the loads add up to, which power architecture is the candidate, and where parts have to sit. The battery, load and enclosure measurements are still missing, and nothing here claims otherwise.
Kino d4 design files
The KiCad project lives in the b5463/kino-d4 repository on GitHub; these links point at the commit this page was built from.
Kino d4: common questions
How big is the Kino d4 PCB?
The Kino d4 measures 117 × 70 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Kino d4?
0 components, from 0 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Kino d4 design files?
From the b5463/kino-d4 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Kino d4 design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.