Blind-Spot-Detector
About the Blind-Spot-Detector PCB
Blind-Spot-Detector is an open source PCB design by caslam, published on GitHub. It is a 4-layer board measuring 48 × 72 mm, with 12 components from 7 distinct parts.
By type, the board carries 6 resistors and 1 connector.
Blind-Spot-Detector bill of materials (BOM)
12 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IMU_2 | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | ~ | HC-06_Module | HC-06 |
| 1 | Lidar_1 | GROVE-HW4-2.0-90D | Lidar_1 |
| 1 | Lidar_2 | GROVE-HW4-2.0-90D | Lidar_2 |
| 1 | Lidar_3 | GROVE-HW4-2.0-90D | Lidar_3 |
| 1 | ~ | MPU6050_Module | MPU6050 |
| 6 | 4.7k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5, R6 |
Blind-Spot-Detector design files
The KiCad project lives in the caslam/Blind-Spot-Detector repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/PCB.kicad_pcb
- SchematicPCB/PCB.kicad_sch
Blind-Spot-Detector: common questions
How big is the Blind-Spot-Detector PCB?
The Blind-Spot-Detector measures 48 × 72 mm, has 4 copper layers and is 1.600198 mm thick.
How many components are on the Blind-Spot-Detector?
12 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the Blind-Spot-Detector design files?
From the caslam/Blind-Spot-Detector repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Blind-Spot-Detector design in my own project?
The repository has no license, so all rights stay with caslam. Use it as a reference, and ask the author before reusing the design.