HardLabs

8keyv4

cgarcia2097·8-Pack·keypad/8keysimplev4/8keyv4.kicad_pcb

8keyv4 PCB layout, top view — open source board by cgarcia2097

About the 8keyv4 PCB

8keyv4 is an open source PCB design by cgarcia2097, published on GitHub under the MIT license. It is a 2-layer board measuring 77 × 39 mm, with 8 components from 1 distinct parts.

It belongs with the keyboards designs in this gallery.

From the project

Repository for design files, source code and assembly guides regarding this keypad.

Inspired by di0ib's Six Pack design, this keypad project is intended for me on learning how to use KiCAD by extending their design to 8 keys. Mishaps, snafus and foobars expected and incoming.

- 8 keys, directly connected to MCU pins - 8 backlight LEDs, individually addresssable - Powered by the Pro Micro - Alps or MX button support - Runs on a simple Arduino sketch, or optionally QMK firmware

8keyv4, from the project README
From the project README

8keyv4 bill of materials (BOM)

8 components, 1 distinct parts — part numbers from the project's BOM.

QtyPartRefs
8
MOMENTARY-SWITCH-SPST-LED-PTH-CHERRY
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8

8keyv4 design files

The KiCad project lives in the cgarcia2097/8-Pack repository on GitHub; these links point at the commit this page was built from.

8keyv4: common questions

How big is the 8keyv4 PCB?

The 8keyv4 measures 77 × 39 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the 8keyv4?

8 components, from 1 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the 8keyv4 design files?

From the cgarcia2097/8-Pack repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the 8keyv4 design in my own project?

Yes, under the terms of its MIT license, which cgarcia2097 chose for the repository.

More boards in 8-Pack

Similar boards