FONA pi
About the FONA pi PCB
FONA pi is an open source PCB design by codestorm1, published on GitHub. It is a 2-layer board measuring 88.4 × 59.1 mm, with 33 components from 13 distinct parts.
By type, the board carries 20 connectors, 6 resistors, 3 jumpers and 3 diodes.
From the project
KiCad design for FONA + raspberry pi
FONA pi bill of materials (BOM)
33 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | Conn_01x20_Socket | PinSocket_1x20_P2.54mm_Vertical | J1, J3, J11, J12 |
| 1 | Conn_02x20_Odd_Even | PinSocket_2x20_P2.54mm_Vertical | J2 |
| 2 | Conn_01x20_Socket | PinHeader_1x20_P2.54mm_Vertical | J4, J7 |
| 2 | Conn_01x18 | PinSocket_1x18_P2.54mm_Vertical | J5, J8 |
| 1 | Conn_01x18_Socket | PinSocket_1x18_P2.54mm_Vertical | J6 |
| 2 | Conn_01x04_Pin | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J9, J10 |
| 5 | Conn_01x06_Socket | PinSocket_1x06_P2.54mm_Vertical | J13, J14, J15, J16, J17 |
| 1 | Conn_01x04 | Wago_734-134_1x04_P3.50mm_Vertical | J18 |
| 2 | Conn_01x08_Socket | PinSocket_1x08_P2.54mm_Vertical | J19, J20 |
| 1 | J2B | SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | G5 |
| 3 | J2B | SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP2, JP3, JP4 |
| 3 | LED | LED_D3.0mm | D1, D2, D3 |
| 6 | R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5, R6 |
FONA pi design files
The KiCad project lives in the codestorm1/FONA_pi repository on GitHub; these links point at the commit this page was built from.
- LayoutFONA_pi.kicad_pcb
- SchematicFONA_pi.kicad_sch
- BOMFONA_pi.csv
FONA pi: common questions
How big is the FONA pi PCB?
The FONA pi measures 88.4 × 59.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the FONA pi?
33 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the FONA pi design files?
From the codestorm1/FONA_pi repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the FONA pi design in my own project?
The repository has no license, so all rights stay with codestorm1. Use it as a reference, and ask the author before reusing the design.