Kicad2spice
About the Kicad2spice PCB
Kicad2spice is an open source PCB design by darylwbarry, published on GitHub. It is a board, with 131 components from 28 distinct parts.
Other key parts include the ADP7157ARDZ-04-R7, SN74AUC1G17DCKR, SN74AUC1G74DCTR and SN74AUC1G04DCKR. By type, the board carries 68 capacitors, 37 resistors, 11 ICs, 7 connectors, 4 inductors and 2 jumpers.
From the project
Convert KiCad netlists to SPICE/QSPICE .cir files, with AI model generation via Claude on OpenRouter
Converts KiCad netlists (.net version E) to SPICE/QSPICE simulation files (.cir).
Optionally generates behavioral SPICE subcircuit models for unmodelled ICs using Claude on OpenRouter, reading datasheets from a local datasheets/ directory.
- Python 3.10+ - pypdf for reading PDF datasheets (optional but recommended): pip install pypdf - An OpenRouter API key for AI model generation (optional)
Main components on the Kicad2spice
Kicad2spice bill of materials (BOM)
131 components, 28 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | ADP7157ARDZ-04-R7 | SOIC127P600X175-9N | U201, U301 |
| 6 | SN74AUC1G17DCKR | DCK5 | U604, U801, U901, U1001, U1101, U1400 |
| 2 | SN74AUC1G74DCTR 74AUC1G74 | DCT8 | U701, U1200 |
| 1 | SN74AUC1G04DCKR | DCK5 | U1300 |
| 5 | CON-SMA-EDGE-S | RFSOLUTIONS_CON-SMA-EDGE-S | J101, J102, J602, J801, J901 |
| 1 | Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | J700 |
| 1 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J1200 |
| 2 | SolderJumper_2_Open | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP701, JP702 |
| 2 | TestPoint | TestPoint_Pad_1.5x1.5mm | TP_Vcc_regen201, TP_Vcc_regen301 |
| 4 | FerriteBead_Small | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | FB101, FB401, FB402, FB501 |
| 4 | GRM155R71H103KA88D 10n | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C101, C401, C413, C501 |
| 4 | GRM155R71H102KA88D 1n | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C102, C402, C414, C502 |
| 20 | GRM1555C1H151JA01D 150p | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C104, C105, C106, C107, C108, C403, C404, C405 +12 |
| 20 | GRM1555C1H330JA01D 33p | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C182, C183, C184, C185, C186, C408, C409, C410 +12 |
| 2 | GRM1885C1H102JA01D 1n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C201, C301 |
| 4 | GRM188R60J106ME47D 10u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C202, C206, C302, C306 |
| 6 | GRM188R71C105KA12D 1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C203, C204, C205, C303, C304, C305 |
| 6 | GRM1555C1H330JA01D 10p | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C701, C1001, C1103, C1201, C1301, C1401 |
| 2 | GRM188R60J104KA01D 4p | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C802, C902 |
| 8 | 0.2 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R101, R102, R401, R402, R403, R404, R501, R502 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | ERJ-3GEJ333V 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R201, R301, R702 |
| 2 | ERJ-3GEYJ303V 30k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R202, R302 |
| 2 | ERJ-3GEYJ203V 20k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R203, R303 |
| 2 | ERJ-3GEJ333V 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R204, R304 |
| 15 | 0 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R601, R602, R802, R803, R804, R805, R901, R902 +7 |
| 2 | ERJ-3GEYJ500V 50 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R609, R701 |
| 2 | 550 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R806, R807 |
| 1 | 200 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1201 |
Kicad2spice design files
The KiCad project lives in the darylwbarry/kicad2spice repository on GitHub; these links point at the commit this page was built from.
- NetlistTestStructures.net
Kicad2spice: common questions
How many components are on the Kicad2spice?
131 components, from 28 distinct parts. The full bill of materials is listed on this page.
Where can I download the Kicad2spice design files?
From the darylwbarry/kicad2spice repository on GitHub, which has a netlist; the links under Design files point to each one.
Can I use the Kicad2spice design in my own project?
The repository has no license, so all rights stay with darylwbarry. Use it as a reference, and ask the author before reusing the design.