Apple1Cartridge
About the Apple1Cartridge PCB
Apple1Cartridge is an open source PCB design by flowenol, published on GitHub. It is a 2-layer board measuring 110.1 × 77.7 mm, with 16 components from 10 distinct parts.
By type, the board carries 6 capacitors and 3 resistors.
From the project
Apple-1 RAM/ROM Cartridge Kicad PCB design
Apple1Cartridge bill of materials (BOM)
16 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74LS74 | DIP-14_W7.62mm_LongPads | BANK1 |
| 1 | 44pin_edge | 44pin1 | CONNECTOR1 |
| 1 | GAL22V10 | DIP-24_W7.62mm_LongPads | DECODER1 |
| 1 | MODE_SWITCH | PinHeader_1x03_P2.54mm_Vertical | MODE_SWITCH1 |
| 1 | 62256 | DIP-28_W15.24mm_LongPads | RAM1 |
| 1 | 62256 | DIP-28_W15.24mm | RAM2 |
| 1 | 28C256 | DIP-28_W15.24mm_LongPads | ROM1 |
| 5 | 0.1uF | C_Disc_D5.0mm_W2.5mm_P2.50mm | C1, C2, C3, C4, C5 |
| 1 | 22uF | CP_Radial_D4.0mm_P2.00mm | C6 |
| 3 | 1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3 |
Apple1Cartridge design files
The KiCad project lives in the flowenol/Apple1CartridgePcb repository on GitHub; these links point at the commit this page was built from.
Apple1Cartridge: common questions
How big is the Apple1Cartridge PCB?
The Apple1Cartridge measures 110.1 × 77.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Apple1Cartridge?
16 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Apple1Cartridge design files?
From the flowenol/Apple1CartridgePcb repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Apple1Cartridge design in my own project?
The repository has no license, so all rights stay with flowenol. Use it as a reference, and ask the author before reusing the design.