FBR25-Electronics

This repository ships a schematic but no board layout.

About the FBR25-Electronics PCB

FBR25-Electronics is an open source PCB design by Full-Blue-Racing, published on GitHub. It is a board, with 52 components from 23 distinct parts.

By type, the board carries 4 switches, 2 diodes and 2 resistors.

From the project

1. Clone this repository to a sensible place on your PC, e.g. inside Documents/FBR/. Remember where it is stored.

1. In KiCad, click Preferences > Manage Symbol Libraries. Ensure you are on the Global Libraries tab in the dialog box.

2. Click the open button in the bottom left. Navigate to where you cloned this repository and open FBR-Symbols.kicadsym`. Click OK.

52 components, 23 distinct parts.

Qty	Part	Footprint	Refs
2	Conn_01x03		BLS1, BPS1
1	AMPSEAL (776273-1)		BSPD1
16	Conn_01x02		BTS1, FAN1, FAN2, INJ1, INJ2, INJ3, INJ4, INS1 +8
1	TE 776273-1		DSH1
1	Superseal 1.5	PinHeader_1x06_P2.54mm_Vertical	DSH2
2	Superseal 1.5		DSH3, DSH4
1	JST XH2.54		DSH5
2	Conn_01x16		FBX1, FBX2
2	Conn_01x19		PBX1, PBX2
1	AMP Superseal		QS1
1	Blue Conn		QS2
1	Yellow Conn		QS3
1	Green Conn		QS4
7	Relay_SPDT_Automotive		RBX1, RBX2, RBX3, RBX4, RBX5, RBX6, RBX7
1	Junior Power Timer		SPKC1
1	Bosch Jetronic		SPKC2
3	SW_Push		SW1, SW3, SW4
1	SW_SPST		SW2
1	Terminal Block		TEL1
1	Amphenol AT		TEL2

Show 3 more

Qty	Part	Refs
1	TE AMPSEAL	WSF1
2	LED_Small	D1, D2
2	R_Small	R1, R2

The KiCad project lives in the Full-Blue-Racing/FBR25-Electronics repository on GitHub; these links point at the commit this page was built from.

52 components, from 23 distinct parts. The full bill of materials is listed on this page.

From the Full-Blue-Racing/FBR25-Electronics repository on GitHub, which has the schematic; the links under Design files point to each one.

The repository has no license, so all rights stay with Full-Blue-Racing. Use it as a reference, and ask the author before reusing the design.