(Panel)
About the (Panel) PCB
(Panel) is an open source PCB design by GerritMihu, published on GitHub. It is a 2-layer board measuring 266.8 × 166.5 mm, with 26 components from 7 distinct parts.
Other key parts include the M74HC4060YRM13TR. By type, the board carries 12 resistors, 10 diodes, 2 capacitors, 1 IC and 1 connector.
From the project
Blinkender Dinosaurier mit dem 14-Bit Zähler 74HCT4060
Ein Widerstand (R1-R12) ist ein elektronisches Bauteil, das den Stromfluss in einem Stromkreis begrenzt oder reguliert. Er wandelt einen Teil der elektrischen Energie in Wärme um und beeinflusst so, wie viel Strom durch einen bestimmten Teil eines Stromkreises fließen kann.
Ein Kondensator (C1 & C2) ist ein elektronisches Bauteil, das elektrische Energie speichert. Er besteht aus zwei leitfähigen Flächen, den sogenannten Platten, die durch ein Isoliermaterial (das Dielektrikum) voneinander getrennt sind. Die Hauptfunktion eines Kondensators ist es, Ladung zu speichern und bei Bedarf wieder…
Main components on the (Panel)
(Panel) bill of materials (BOM)
26 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | M74HC4060YRM13TR | SOIC-16_3.9x9.9mm_P1.27mm | IC1 |
| 1 | CONN_01X02_PIN Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 10 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3, D4, D5, D6, D7, D8 +2 |
| 2 | 100NF 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 10 | 390R | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8 +2 |
| 1 | 120K 120k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R11 |
| 1 | 56K 56k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R12 |
(Panel) design files
The KiCad project lives in the GerritMihu/SMT-Dino repository on GitHub; these links point at the commit this page was built from.
(Panel): common questions
How big is the (Panel) PCB?
The (Panel) measures 266.8 × 166.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the (Panel)?
26 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the (Panel) design files?
From the GerritMihu/SMT-Dino repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the (Panel) design in my own project?
The repository has no license, so all rights stay with GerritMihu. Use it as a reference, and ask the author before reusing the design.
