Auto BOM
About the Auto BOM PCB
Auto BOM is an open source PCB design by harrisontidy, published on GitHub. It is a board, with 3 components from 2 distinct parts.
By type, the board carries 2 resistors and 1 capacitor.
From the project
AI-assisted KiCad BOM parser and electronic component sourcing tool.
Open sourcing-demo.kicadsch` in the custom KiCad editor. This is an RC divider with R1/R2 = 10 kΩ and C1 = 100 nF. Its nominal unloaded DC gain is 1/2 and cutoff is approximately 318 Hz.
Native Auto BOM selected Basic parts C17414 for R1/R2 and C14663 for C1, with AI disabled. It preserved the resistor footprints and automatically filled C1's empty footprint from EasyEDA. The grouped native export is sourcing-demo.csv.
Auto BOM bill of materials (BOM)
3 components, 2 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CC0603KRX7R9BB104 100nF YAGEO | C0603 | C1 |
| 2 | 0805W8F1002T5E 10k UNI-ROYAL(Uniroyal Elec) | R_0805_2012Metric | R1, R2 |
Auto BOM design files
The KiCad project lives in the harrisontidy/auto_BOM repository on GitHub; these links point at the commit this page was built from.
Auto BOM: common questions
How many components are on the Auto BOM?
3 components, from 2 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Auto BOM design files?
From the harrisontidy/auto_BOM repository on GitHub, which has the schematic, a netlist and the BOM; the links under Design files point to each one.
Can I use the Auto BOM design in my own project?
The repository has no license, so all rights stay with harrisontidy. Use it as a reference, and ask the author before reusing the design.