Toveri
About the Toveri PCB
Toveri is an open source PCB design by Hypernova-Oy, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 20 × 42 mm, with 32 components from 20 distinct parts.
By type, the board carries 6 resistors, 4 diodes, 2 transformers, 1 LED and 1 capacitor.
From the project
Weatherproof embedded user authenticator and authorizator device
In this directory we present the KiCad electronic schematics you need to assemble this device.
- toveri-directory has the master schematics for all the needed hardware components.
Toveri bill of materials (BOM)
32 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AST-1732MR-R PUI Audio | AST-1732MR-R | AST1 |
| 2 | DS18B20+ Maxim Integrated | TO-92_Inline_Wide | DS1, DS2 |
| 2 | EC2-3TNU KEMET | EC2-3TNU | EC1, EC2 |
| 1 | HEADER_A_1X04 Molex | Pin_Header_Angled_1x04_Pitch2.54mm | H1 |
| 2 | HEADER_S_1X03 Molex | Pin_Header_Straight_1x03_Pitch2.54mm | H2, H8 |
| 2 | HEADER_S_1X04 Molex | Pin_Header_Straight_1x04_Pitch2.54mm | H3, H10 |
| 2 | HEADER_S_1X07 Molex | Pin_Header_Straight_1x07_Pitch2.54mm | H4, H9 |
| 2 | HEADER_A_1X07_F Molex | Header-1x7-F (Molex 38-00-1337) | H5, H6 |
| 1 | NHD-0420CW-AB3 Newhaven Display | Pin_Header_Straight_1x20_Pitch2.54mm | NHD1 |
| 2 | RJ45_2XPORT RJ45_2xPort Wurth Elektronik | RJ45 dual port - WE-15016137621 | RJ1, RJ2 |
| 1 | RPi_GPIO Adafruit | PI_GPIO_Header_F_2x20 | RPi1 |
| 1 | SCREW_TERMINAL_01X04 Screw_Terminal_01x04 Molex | Terminal 1x4 (Molex-398800304) | T1 |
| 1 | SCREW_TERMINAL_01X02 Screw_Terminal_01x02 Molex | Screw_Terminal_01x02 (Molex) | T2 |
| 1 | WP154A4SUREQBFZGC Kingbright | WP154A4SUREQBFZGC | LED1 |
| 4 | D Vishay Semiconductors | 1N4154TAP | D1, D2, D3, D4 |
| 1 | CP Nichicon | UMW0G101MDD | C1 |
| 1 | 110 KOA Speer | Resistor_ThroughHole_Vertical_6.3x2.3mm_Spacing2.54mm | R1 |
| 2 | 220 KOA Speer | Resistor_ThroughHole_Vertical_6.3x2.3mm_Spacing2.54mm | R2, R3 |
| 2 | 4.7K 4.7k KOE Speer | Resistor_ThroughHole_6.3x2.3mm_Spacing2.54mm | R4, R5 |
| 1 | 110 KOA Speer | Resistor_ThroughHole_6.3x2.3mm_Spacing2.54mm | R6 |
Toveri design files
The KiCad project lives in the Hypernova-Oy/emb-toveri repository on GitHub; these links point at the commit this page was built from.
Toveri: common questions
How big is the Toveri PCB?
The Toveri measures 20 × 42 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Toveri?
32 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Toveri design files?
From the Hypernova-Oy/emb-toveri repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Toveri design in my own project?
Yes, under the terms of its GPL-3.0 license, which Hypernova-Oy chose for the repository.
