CORNE6 LEFT
About the CORNE6 LEFT PCB
CORNE6 LEFT is an open source PCB design by kobago, published on GitHub. It is a 2-layer board measuring 140 × 104 mm, with 44 components from 24 distinct parts.
Other key parts include the Pro Micro. By type, the board carries 22 switches, 21 diodes and 1 IC.
From the project
KiCad 風の基板設計アプリを、fuide (egui 0.36 向けの FUI 部品ライブラリ) の上に作るプロジェクト。今は 試作 (spike) の段階で、「Rust で使えるカーネルの調査」(docs/kernel-research.md) の結論を実際に組んで確かめたもの。
KiCad 風の基板設計アプリを、fuide (egui 0.36 向けの FUI 部品ライブラリ) の上に作るプロジェクト。今は 試作 (spike) の段階で、「Rust で使えるカーネルの調査」(docs/kernel-research.md) の結論を実際に組んで確かめたもの。
fuide 本体と 3D ビューポート fuide-3d は git 依存 (private なので SSH。Cargo.toml の [workspace.dependencies]、egui の版を揃えること)。隣の checkout ../fuide / ../fuide-3d で直しながら動かすときは Cargo.toml 末尾のコメントの [patch] を外す。
- 基板: .kicadpcb の (footprint …) 形式 (KiCad 6 以降)。動作確認は 8.0 (Raspberry Pi CM5 IO)、9.0、10.0 (testdata)。書き出しは 10 形式 (version 20260206)。 - 回路図: .kicadsch (KiCad 6 以降)。動作確認は 8.0 (CM5 IO、階層シート) と 9.0。書き出しは 9 形式 (version 20250114)。 - KiCad 5 以前 ((module …) の基板、.sch / .lib…
Main components on the CORNE6 LEFT
CORNE6 LEFT bill of materials (BOM)
44 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Pro Micro | ProMicro | U1 |
| 1 | R0C0 | SW_MX_1u | SW1 |
| 1 | R0C1 | SW_MX_1u | SW2 |
| 1 | R0C2 | SW_MX_1u | SW3 |
| 1 | R0C3 | SW_MX_1u | SW4 |
| 1 | R0C4 | SW_MX_1u | SW5 |
| 1 | R0C5 | SW_MX_1u | SW6 |
| 1 | R1C0 | SW_MX_1u | SW7 |
| 1 | R1C1 | SW_MX_1u | SW8 |
| 1 | R1C2 | SW_MX_1u | SW9 |
| 1 | R1C3 | SW_MX_1u | SW10 |
| 1 | R1C4 | SW_MX_1u | SW11 |
| 1 | R1C5 | SW_MX_1u | SW12 |
| 1 | R2C0 | SW_MX_1u | SW13 |
| 1 | R2C1 | SW_MX_1u | SW14 |
| 1 | R2C2 | SW_MX_1u | SW15 |
| 1 | R2C3 | SW_MX_1u | SW16 |
| 1 | R2C4 | SW_MX_1u | SW17 |
| 1 | R2C5 | SW_MX_1u | SW18 |
| 1 | R3C3 | SW_MX_1u | SW19 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | R3C4 | SW_MX_1u | SW20 |
| 1 | R3C5 | SW_MX_1u | SW21 |
| 1 | RESET | SW_Push_6mm | SW22 |
| 21 | 1N4148W | D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 +13 |
CORNE6 LEFT design files
The KiCad project lives in the kobago/fuide-eda repository on GitHub; these links point at the commit this page was built from.
CORNE6 LEFT: common questions
How big is the CORNE6 LEFT PCB?
The CORNE6 LEFT measures 140 × 104 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CORNE6 LEFT?
44 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the CORNE6 LEFT design files?
From the kobago/fuide-eda repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the CORNE6 LEFT design in my own project?
The repository has no license, so all rights stay with kobago. Use it as a reference, and ask the author before reusing the design.
