LEC001021-Module de freinage-DCC-3A
About the LEC001021-Module de freinage-DCC-3A
LEC001021-Module de freinage-DCC-3A is an open source PCB design by LECTIX, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 30 × 30 mm, with 6 components from 3 distinct parts.
By type, the board carries 5 diodes and 1 connector.
From the project
Fichiers sources pour le produit LEC001021
Arrêtez et redémarrez vos convois de manière automatique et réaliste avec des arrêts et redémarrages progressifs des trains. - Technologie ABC - Courrant maximum de 3A. - Compatibilité DCC uniquement (digital). Les décodeurs doivent être compatible avec la technologie ABC (Cf. notice).
Il n'est pas nécessaire de savoir souder ou d'être bon en électronique pour se procurer ce produit. Grâce aux fichiers sources publiés ici, vous pouvez être en mesure de faire fabriquer ce produit par un sous traitant.
LEC001021-Module de freinage-DCC-3A bill of materials (BOM)
6 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DB301V-5.0-2P-BU-S Screw_Terminal_01x02_blue | TerminalBlock_bornier-2_P5.08mm-blue | J1 |
| 4 | RS3M LGE | D_SMC | D1, D2, D4, D5 |
| 1 | SS34C MDD | D_SMC | D3 |
LEC001021-Module de freinage-DCC-3A design files
The KiCad project lives in the LECTIX/LEC001021-Module-de-freinage-DCC-3A repository on GitHub; these links point at the commit this page was built from.
LEC001021-Module de freinage-DCC-3A: common questions
How big is the LEC001021-Module de freinage-DCC-3A?
The LEC001021-Module de freinage-DCC-3A measures 30 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LEC001021-Module de freinage-DCC-3A?
6 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the LEC001021-Module de freinage-DCC-3A design files?
From the LECTIX/LEC001021-Module-de-freinage-DCC-3A repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the LEC001021-Module de freinage-DCC-3A design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which LECTIX chose for the repository.