EcoSMRTv1
About the EcoSMRTv1 PCB
EcoSMRTv1 is an open source PCB design by leongu11, published on GitHub. It is a 2-layer board measuring 25 × 41.5 mm, with 5 components from 4 distinct parts.
By type, the board carries 3 connectors, 1 diode and 1 capacitor.
From the project
a trash can which sorts its waste
I plan to use a perfboard using these as references for the physical project.
Parts are printed in PLA, amounting to around 300 grams of filament (although all my prototypes summed up to a kg spool) These consist of the bin's lid, which revolves on small axis extensions. These pass through bores that connect to the edges of the lid, and, when connected to the servo, keep the lid at the set position. The mount for the ESP32 slides around the servo's housing and attach to its walls. Additionally, I have modeled small attachments to connect the two halves of the lid if it cannot be printed as…
EcoSMRTv1 bill of materials (BOM)
5 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | Conn_01x07_Socket | PinSocket_1x07_P2.54mm_Vertical_SMD_Pin1Right | J1, J2 |
| 1 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | 1N4007 | D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | C_Polarized | C_Radial_D5.0mm_H11.0mm_P2.00mm | C2 |
EcoSMRTv1 design files
The KiCad project lives in the leongu11/ecoSMRT-trash-sort repository on GitHub; these links point at the commit this page was built from.
EcoSMRTv1: common questions
How big is the EcoSMRTv1 PCB?
The EcoSMRTv1 measures 25 × 41.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the EcoSMRTv1?
5 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the EcoSMRTv1 design files?
From the leongu11/ecoSMRT-trash-sort repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the EcoSMRTv1 design in my own project?
The repository has no license, so all rights stay with leongu11. Use it as a reference, and ask the author before reusing the design.
