Pcb blled
About the Pcb blled
Pcb blled is an open source PCB design by Luro02, published on GitHub. It is a 2-layer board measuring 28 × 51.5 mm, with 6 components from 6 distinct parts.
By type, the board carries 3 connectors, 2 resistors and 1 transistor.
From the project
Printed Circuit Board Design for controlling an led strip with a bambulab printer
Pcb blled bill of materials (BOM)
6 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IRLB8721 | TO-220-3_Horizontal_TabDown | Q1 |
| 1 | LEDs | TerminalBlock_bornier-2_P5.08mm | J1 |
| 1 | Input | TerminalBlock_bornier-2_P5.08mm | J2 |
| 1 | P1S | TerminalBlock_bornier-2_P5.08mm | J3 |
| 1 | Resistor | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | Pull-down Resistor | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
Pcb blled design files
The KiCad project lives in the Luro02/pcb-blled repository on GitHub; these links point at the commit this page was built from.
- LayoutBLLED.kicad_pcb
- SchematicBLLED.kicad_sch
Pcb blled: common questions
How big is the Pcb blled?
The Pcb blled measures 28 × 51.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pcb blled?
6 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pcb blled design files?
From the Luro02/pcb-blled repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Pcb blled design in my own project?
The repository has no license, so all rights stay with Luro02. Use it as a reference, and ask the author before reusing the design.