Raspberry pi compute module base board
About the Raspberry pi compute module base board
Raspberry pi compute module base board is an open source PCB design by magkopian, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 93.2 × 62.4 mm, with 61 components from 25 distinct parts.
Other key parts include the REG1117-3.3 and REG1117A-1.8. By type, the board carries 23 capacitors, 15 resistors, 10 diodes, 6 connectors, 3 transistors and 2 ICs.
From the project
Base board for the Raspberry Pi Compute Module
Raspberry Pi Compute Module Base Board ================================
These are the design files for a circuit board intended to be used as a base for other custom PCB designs that make use of the Raspberry Pi Compute Module.
If you want to design a custom PCB based on the Raspberry Pi Compute Module but you have never done it before, this project can serve as a starting point. The board is designed on KiCAD which is an open source and cross-platform EDA software, in order to allow as many people as possible to take advantage of it.
Main components on the Raspberry pi compute module base board
Raspberry pi compute module base board bill of materials (BOM)
61 components, 25 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | REG1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | REG1117A-1.8 | SOT-223-3_TabPin2 | U3 |
| 2 | 2N7002P.215 | SOT-23 | Q1, Q3 |
| 1 | DMP3056L-7 | SOT-23 | Q2 |
| 1 | 2001-1-2-21-00-BK | HDMI_MOLEX_471510001 | J1 |
| 1 | JC-128 | JC-128 | J2 |
| 1 | POWER | USB_Micro-B | P1 |
| 1 | HOST | USB_A | P2 |
| 1 | CAM1 | FPC_22 | P3 |
| 1 | CONN_02X20 | Pin_Header_Straight_2x20 | P4 |
| 1 | 2A 6V | Polyfuse_0805 | F1 |
| 1 | Board_RPi_CM3_200pConnector_multipart | Conn_TE-DDR2-SODIMM-0.6-200P-doublesided | MD1 |
| 1 | GREEN LED | LED_0805 | D1 |
| 2 | BAT54 | SOT-23 | D2, D3 |
| 6 | BAV99 | SOT-23 | D4, D5, D6, D7, D9, D10 |
| 1 | RED LED | LED_0805 | D8 |
| 14 | 100nF | C_0402 | C1, C2, C3, C4, C5, C6, C7, C8 +6 |
| 5 | 10uF | CP_Tantalum_Case-C_EIA-6032-28_Reflow | C10, C11, C14, C15, C16 |
| 2 | 10uF | C_0805 | C20, C21 |
| 2 | 33nF | C_0402 | C22, C23 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 100K | R_0603_HandSoldering | R1, R6, R7, R8 |
| 3 | 1K | R_0603_HandSoldering | R2, R3, R11 |
| 4 | 1.8K | R_0603_HandSoldering | R4, R5, R9, R10 |
| 2 | 150R | R_0603_HandSoldering | R12, R13 |
| 2 | 270R | R_0603_HandSoldering | R14, R15 |
Raspberry pi compute module base board design files
The KiCad project lives in the magkopian/raspberry-pi-compute-module-base-board repository on GitHub; these links point at the commit this page was built from.
Raspberry pi compute module base board: common questions
How big is the Raspberry pi compute module base board?
The Raspberry pi compute module base board measures 93.2 × 62.4 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Raspberry pi compute module base board?
61 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Raspberry pi compute module base board design files?
From the magkopian/raspberry-pi-compute-module-base-board repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Raspberry pi compute module base board design in my own project?
Yes, under the terms of its GPL-3.0 license, which magkopian chose for the repository.