Fluke9010-protection
About the Fluke9010-protection PCB
Fluke9010-protection is an open source PCB design by mdeslaur, published on GitHub. It is a 2-layer board measuring 18.3 × 33.8 mm, with 33 components from 5 distinct parts.
By type, the board carries 24 resistors, 8 diodes and 1 connector.
From the project
Fluke 9010a protection module reproduction
This is a replacement Fluke 9010a protection module. It is based on the schematics in the Z80 pod manual, and some information from the KLOV forums.
I drew this so I could have them fabricated and save me the trouble of soldering the surface mount components myself. This directory includes the gerber, BOM, and placement files required to get the boards assembled by jlcpcb.com.
Fluke9010-protection bill of materials (BOM)
33 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 26 Pin DIP header | DIP-26_W15.24mm_Socket_LongPads | J1 |
| 8 | BAV99 | SOT-23 | D1, D2, D3, D4, D5, D6, D7, D8 |
| 8 | 100 R_US | R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R8 |
| 8 | 3.01K R_US | R_0603_1608Metric | R11, R12, R13, R14, R15, R16, R17, R18 |
| 8 | 280K R_US | R_0603_1608Metric | R21, R22, R23, R24, R25, R26, R27, R28 |
Fluke9010-protection design files
The KiCad project lives in the mdeslaur/fluke9010-protection repository on GitHub; these links point at the commit this page was built from.
Fluke9010-protection: common questions
How big is the Fluke9010-protection PCB?
The Fluke9010-protection measures 18.3 × 33.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Fluke9010-protection?
33 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Fluke9010-protection design files?
From the mdeslaur/fluke9010-protection repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Fluke9010-protection design in my own project?
The repository has no license, so all rights stay with mdeslaur. Use it as a reference, and ask the author before reusing the design.