Basys3-FPGA-4x4-Keypad-Verilog
About the Basys3-FPGA-4x4-Keypad-Verilog PCB
Basys3-FPGA-4x4-Keypad-Verilog is an open source PCB design by MehmetBurakYilmaz55, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 25 components from 4 distinct parts.
By type, the board carries 16 switches, 8 resistors and 1 connector.
From the project
Verilog driver for 4x4 Matrix Keypad on Basys 3 FPGA including custom Latching/Freeze algorithm
Bu proje, Kocaeli Üniversitesi Elektronik ve Haberleşme Mühendisliği bölümü kapsamında; Digilent Basys 3 FPGA kartı için geliştirilmiş bir 4x4 Matris Keypad sürücüsü ve donanım tasarımını içerir.
Projenin en özgün yanı, standart "Debouncer" modülleri kullanmak yerine, mekanik gürültüleri (bouncing) donanımsal mantıkla çözen "Freeze & Latch" (Dondur ve Kilitle) algoritmasının kullanılmasıdır.
Basys3-FPGA-4x4-Keypad-Verilog bill of materials (BOM)
25 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_02x06_Odd_Even | PinHeader_2x06_P2.54mm_Horizontal | J1 |
| 16 | SW_Push_Dual | SW_SPST_PTS645Sx43SMTR92 | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +8 |
| 4 | 330 | SMD_Res_Big_Pad | R9, R10, R11, R12 |
| 4 | 10k | SMD_Res_Big_Pad | R13, R14, R15, R16 |
Basys3-FPGA-4x4-Keypad-Verilog design files
The KiCad project lives in the MehmetBurakYilmaz55/Basys3-FPGA-4x4-Keypad-Verilog repository on GitHub; these links point at the commit this page was built from.
Basys3-FPGA-4x4-Keypad-Verilog: common questions
How big is the Basys3-FPGA-4x4-Keypad-Verilog PCB?
The Basys3-FPGA-4x4-Keypad-Verilog measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Basys3-FPGA-4x4-Keypad-Verilog?
25 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the Basys3-FPGA-4x4-Keypad-Verilog design files?
From the MehmetBurakYilmaz55/Basys3-FPGA-4x4-Keypad-Verilog repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Basys3-FPGA-4x4-Keypad-Verilog design in my own project?
The repository has no license, so all rights stay with MehmetBurakYilmaz55. Use it as a reference, and ask the author before reusing the design.