Debugboard
About the Debugboard PCB
Debugboard is an open source PCB design by mickeeriksson, published on GitHub. It is a 2-layer board measuring 160 × 70 mm, with 18 components from 11 distinct parts.
By type, the board carries 9 resistors and 5 connectors.
Debugboard bill of materials (BOM)
18 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MBUS_8/16 | PinHeader_2x20_P2.54mm_Vertical | J1 |
| 1 | Conn_01x16_Pin | PinHeader_1x16_P2.54mm_Vertical | J2 |
| 1 | Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | J3 |
| 1 | Conn_01x05_Pin | PinHeader_1x05_P2.54mm_Vertical | J4 |
| 1 | Conn_02x06_Odd_Even | PinHeader_2x06_P2.54mm_Vertical | J5 |
| 1 | HDSP-4836_2 | HDSP-4836 | BAR1 |
| 1 | LTA-1000HR | DIPS762W50P254L2527H825Q20N | DS1 |
| 2 | LTA-1000Y | DIPS762W50P254L2527H825Q20N | DS2, DS3 |
| 6 | 330 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5, R6 |
| 1 | 4609X-101-331LF 330 | 4609X101102LF | RN1 |
| 2 | 4611X-101-331LF 330 | 4611X101221LF | RN2, RN3 |
Debugboard design files
The KiCad project lives in the mickeeriksson/MIC-1 repository on GitHub; these links point at the commit this page was built from.
Debugboard: common questions
How big is the Debugboard PCB?
The Debugboard measures 160 × 70 mm, has 2 copper layers and is 1.579 mm thick.
How many components are on the Debugboard?
18 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Debugboard design files?
From the mickeeriksson/MIC-1 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Debugboard design in my own project?
The repository has no license, so all rights stay with mickeeriksson. Use it as a reference, and ask the author before reusing the design.
