Voltage divider board
About the Voltage divider board
Voltage divider board is an open source PCB design by Minisng, published on GitHub. It is a 2-layer board measuring 21 × 17 mm, with 4 components from 4 distinct parts.
By type, the board carries 2 connectors and 2 resistors.
From the project
[프로젝트 보고서] Voltage Divider Board Design & Simulation 1. Project Overview (프로젝트 개요) 목적: 10V DC 입력 전원을 받아 안정적인 2V DC 전압을 출력하는 전압 분배 회로 설계 및 PCB 제작 데이터 구축 주요 사양: Input Voltage ($V{in}$): 10V DC Target Output Voltage ($V{out}$): 2.0V DC Load Resistance ($R1, R2$): $R1 = 8\text{k}\Ome
[프로젝트 보고서] Voltage Divider Board Design & Simulation 1. Project Overview (프로젝트 개요) 목적: 10V DC 입력 전원을 받아 안정적인 2V DC 전압을 출력하는 전압 분배 회로 설계 및 PCB 제작 데이터 구축 주요 사양: Input Voltage ($V{in}$): 10V DC Target Output Voltage ($V{out}$): 2.0V DC Load Resistance ($R1, R2$): $R1 = 8\text{k}\Omega$, $R2 = 2\text{k}\Omega$ 사용 툴: LTspice (Simulation), KiCad 8.0 (Schematic & Layout) 2. Circuit Theory & LTspice Simulation (시뮬레이션 및 검증) ① 전압 분배 수식 검증 $$V{out} = V{in} \times \frac{R2}{R1 + R2} = 10\text{V} \times \frac{2\text{k}\Omega}{8\text{k}\Omega + 2\text{k}\Omega} = 2.0\text{V}$$ ② LTspice Transient Analysis…
Voltage divider board bill of materials (BOM)
4 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x02_Pin | R_0805_2012Metric | J1 |
| 1 | Conn_01x02_Pin | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | J2 |
| 1 | 8k | PinHeader_1x02_P2.54mm_Vertical | R1 |
| 1 | 2k | PinHeader_1x02_P2.54mm_Vertical | R2 |
Voltage divider board design files
The KiCad project lives in the Minisng/voltage-divider-board repository on GitHub; these links point at the commit this page was built from.
Voltage divider board: common questions
How big is the Voltage divider board?
The Voltage divider board measures 21 × 17 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Voltage divider board?
4 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the Voltage divider board design files?
From the Minisng/voltage-divider-board repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Voltage divider board design in my own project?
The repository has no license, so all rights stay with Minisng. Use it as a reference, and ask the author before reusing the design.