Induction heater control
About the Induction heater control PCB
Induction heater control is an open source PCB design by MuhammedAdel68, published on GitHub. It is a board, with 22 components from 13 distinct parts.
Other key parts include the IGBT_FullBridge_1200V_50A and ACS758-050B. By type, the board carries 12 capacitors, 3 connectors, 2 ICs, 2 resistors, 1 fuse and 1 diode.
From the project
This repository is an engineering design workspace for a proposed 6 kW induction-heater concept. It contains early schematics, firmware scaffolding, calculations, and simulation sources. It is incomplete and is not production-ready, certified, or suitable for unsupervised constru
This repository is an engineering design workspace for a proposed 6 kW induction-heater concept. It contains early schematics, firmware scaffolding, calculations, and simulation sources. It is incomplete and is not production-ready, certified, or suitable for unsupervised construction or operation.
This project combines lethal mains voltage, high current, high-frequency switching, hot molten metal, intense electromagnetic fields, water cooling, and stored electrical energy. The schematics, firmware, bills of materials, and simulations are incomplete and may contain errors. Do not build…
Main components on the Induction heater control
Induction heater control bill of materials (BOM)
22 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IGBT_FullBridge_1200V_50A | U1 | |
| 1 | ACS758-050B | TO-220-5_P3.4mm_StaggeredEven_Lead4mm_Vertical | U2 |
| 1 | AC_Input_L-N-PE | PhoenixContact_MC_1,5_3-G-3.5_1x03_P3.50mm_Horizontal | J1 |
| 1 | DC_Output_OUT_A-OUT_B | PhoenixContact_MC_1,5_2-G-3.5_1x02_P3.50mm_Horizontal | J2 |
| 1 | Signal_Header_GateDriver_Control | PinHeader_1x08_P2.54mm_Vertical | J3 |
| 1 | 50A 50A 250VAC | Fuseholder_Cylinder_5x20mm_Schurter_0031_8201_Horizontal_Open | F1 |
| 1 | NTC_10k | ThermalSensor_Keystone_5000-5009_THT | TH1 |
| 1 | KBPC5012 1200V/50A | Diode_Bridge_Round_D10.9mm | D1 |
| 6 | 22uF 450V Film | CP_Radial_D22.0mm_P10.00mm | C1, C2, C3, C4, C5, C6 |
| 4 | 100NF 100nF 1200V | C_Disc_D5.0mm_W2.5mm_P5.00mm | C7, C8, C9, C10 |
| 2 | 1uF 630V Film | C_Rect_L13.0mm_W4.0mm_P10.00mm_MKT | C11, C12 |
| 1 | 1k 100W | R_Axial_Power_L38.0mm_W8.8mm_P45.0mm | R1 |
| 1 | 10k 0.1W | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
Induction heater control design files
The KiCad project lives in the MuhammedAdel68/induction-heater-control repository on GitHub; these links point at the commit this page was built from.
Induction heater control: common questions
How many components are on the Induction heater control?
22 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Induction heater control design files?
From the MuhammedAdel68/induction-heater-control repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.
Can I use the Induction heater control design in my own project?
The repository has no license, so all rights stay with MuhammedAdel68. Use it as a reference, and ask the author before reusing the design.