Huggerbug wall
About the Huggerbug wall PCB
Huggerbug wall is an open source PCB design by neilpstevenson, published on GitHub under the MIT license. It is a 2-layer board measuring 34.9 × 34.9 mm, with 23 components from 16 distinct parts.
By type, the board carries 5 diodes, 4 resistors, 3 capacitors, 2 modules, 2 transistors and 2 LEDs.
From the project
Source code for micromouse Monty Mini
Huggerbug wall bill of materials (BOM)
23 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Motor-LEFT | PinHeader_1x02_P1.27mm_Vertical | M1 |
| 1 | Motor-RIGHT | PinHeader_1x02_P1.27mm_Vertical | M2 |
| 1 | IRLZ44N | TO-252-2 | Q1 |
| 1 | IRF4905 | TO-252-2 | Q2 |
| 1 | Battery 3.7v | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J1 |
| 1 | 100k | Potentiometer_Bourns_TC33X_Vertical | RV1 |
| 2 | 10k | Potentiometer_Bourns_TC33X_Vertical | RV2, RV3 |
| 1 | ON-OFF | PinHeader_2x03_P2.54mm_Vertical_SMD | SW1 |
| 2 | BPW85C | LED_D3.0mm_Clear | FORWARD_Q2, LEFT_Q1 |
| 2 | BAT54J | D_SOD-323F | D1, D2 |
| 2 | LED | LED_D5.0mm | D3, D5 |
| 1 | MBR340 | D_SMA | D4 |
| 2 | 10nF | C_0805_2012Metric | C1, C2 |
| 1 | 47uF | C_1206_3216Metric | C3 |
| 2 | 1k5 | R_0805_2012Metric | R1, R2 |
| 2 | 110R | R_0805_2012Metric | R9, R10 |
Huggerbug wall design files
The KiCad project lives in the neilpstevenson/monty-mouse-mini repository on GitHub; these links point at the commit this page was built from.
Huggerbug wall: common questions
How big is the Huggerbug wall PCB?
The Huggerbug wall measures 34.9 × 34.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Huggerbug wall?
23 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Huggerbug wall design files?
From the neilpstevenson/monty-mouse-mini repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Huggerbug wall design in my own project?
Yes, under the terms of its MIT license, which neilpstevenson chose for the repository.
More boards in monty-mouse-mini
RP2040/RP2350Half monty-2
47.7 × 45.5 mm50 parts2LMIT0
DragNoseV2
112 × 112.2 mm35 parts2LMIT0
Line sensor half-6
90.7 × 28.5 mm29 parts2LMIT0
Wall sens fpc-4
51.5 × 19.7 mm28 parts2LMIT0
Line sensor mini-5
72.4 × 19.7 mm26 parts2LMIT0
RP2040/RP2350Half rp2040z-2
31.1 × 40.2 mm25 parts2LMIT0
RP2040/RP2350Half line fpc
31.1 × 40.2 mm24 parts2LMIT0
Line sensor mini-4
72.4 × 19.7 mm21 parts2LMIT0
Huggerbug line
40.9 × 40.9 mm19 parts2LMIT0
DragSeeedXiao
60.1 × 35.3 mm12 parts2LMIT0