Star wars arcade sound
About the Star wars arcade sound PCB
Star wars arcade sound is an open source PCB design by nmikstas, published on GitHub. It is a 2-layer board measuring 292.1 × 227.3 mm, with 162 components from 54 distinct parts.
By type, the board carries 61 capacitors, 56 resistors, 12 test points, 4 transistors, 4 connectors and 2 fuses.
From the project
Reproduction of the Star Wars arcade sound PCB
Star wars arcade sound bill of materials (BOM)
162 components, 54 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 2N3906 | GenericTrans | Q1, Q2 |
| 2 | 2N3904 | GenericTrans | Q3, Q4 |
| 1 | 2764 | DIP28 | J/K_1 |
| 1 | sw_main_connector | P1 | P1 |
| 1 | sw_aud_connector | Aud_Con | P2 |
| 1 | sw_audio_edge_connector | P3 | P3 |
| 1 | LM556 | DIP14 | A_3 |
| 3 | TL084 | DIP14 | B_2, C_3, C_4 |
| 1 | R5106 | DIP8 | B_3 |
| 4 | POKEY | DDIP40 | D_2, D_3, D_4, D_5 |
| 1 | 6532A | DDIP40 | E_1 |
| 1 | 6116 | DDIP24 | F/H_1 |
| 1 | 74LS125 | DIP14 | F/H_5 |
| 1 | C04 | DIP14 | F_2 |
| 2 | 74LS161 | DIP16 | F_3, F_5 |
| 1 | 2764 | DIP28 | H_1 |
| 1 | 74LS04 | DIP14 | H_2 |
| 1 | 74LS00 | DIP14 | H_3 |
| 1 | 74LS74 | DIP14 | H_5 |
| 2 | 74LS139 | DIP16 | J_2, J_3 |
Show 34 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 74LS374 | DIP20 | J_5, K_5 |
| 1 | MC6809E | DDIP40 | K_3 |
| 12 | tp_2_pin | TEST_POINT | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 +4 |
| 1 | BLUE LED | LED | DS1 |
| 38 | .1uf | GenericComp | C1, C2, C3, C4, C5, C6, C7, C8 +30 |
| 4 | 100uf 50v | LargeCap1 | C13, C15, C47, C53 |
| 1 | 100uf 50v | LargeCap2 | C14 |
| 4 | 1000pf | GenericComp | C29, C33, C35, C39 |
| 3 | .1uf | GenericComp2 | C34, C38, C40 |
| 1 | .01uf | GenericComp | C44 |
| 7 | .0027uf | GenericComp | C46, C48, C49, C50, C56, C57, C58 |
| 1 | .47uf | MedCap1 | C51 |
| 1 | 10uf 35v | MedCap1 | C52 |
| 1 | TMS-5220 | DIP28 | C/D_1 |
| 9 | 1k | GenericComp | R1, R4, R7, R12, R15, R20, R22, R24 +1 |
| 8 | 10k | GenericComp | R2, R3, R5, R6, R10, R13, R17, R37 |
| 3 | 100 | GenericComp | R8, R9, R44 |
| 3 | 3.3k | GenericComp | R11, R14, R16 |
| 1 | 1.8k | GenericComp | R18 |
| 2 | 100k | GenericComp | R19, R28 |
| 3 | 47k | GenericComp | R21, R23, R50 |
| 2 | 82k | GenericComp | R25, R27 |
| 1 | 15k | GenericComp | R29 |
| 6 | 12k | GenericComp | R30, R39, R40, R42, R46, R47 |
| 2 | 560k | GenericComp | R31, R32 |
| 2 | 4.7k | GenericComp | R33, R34 |
| 3 | 2.2k | GenericComp | R35, R51, R56 |
| 1 | 15 | GenericComp | R36 |
| 1 | 470 | GenericComp | R38 |
| 1 | 68k | GenericComp | R41 |
| 1 | 1.5k | GenericComp | R43 |
| 1 | 470k | GenericComp | R45 |
| 4 | 22k | GenericComp2 | R48, R49, R52, R53 |
| 2 | 47k | GenericComp2 | R54, R55 |
Star wars arcade sound design files
The KiCad project lives in the nmikstas/star_wars_arcade_sound_pcb repository on GitHub; these links point at the commit this page was built from.
Star wars arcade sound: common questions
How big is the Star wars arcade sound PCB?
The Star wars arcade sound measures 292.1 × 227.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Star wars arcade sound?
162 components, from 54 distinct parts. The full bill of materials is listed on this page.
Where can I download the Star wars arcade sound design files?
From the nmikstas/star_wars_arcade_sound_pcb repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Star wars arcade sound design in my own project?
The repository has no license, so all rights stay with nmikstas. Use it as a reference, and ask the author before reusing the design.