Tinywhoop3
About the Tinywhoop3 PCB
Tinywhoop3 is an open source PCB design by Norbi76, published on GitHub. It is a 2-layer board measuring 70 × 70 mm, with 19 components from 10 distinct parts.
By type, the board carries 6 connectors, 4 transistors, 4 diodes, 4 resistors and 1 capacitor.
From the project
Adresa repository: https://github.com/Norbi76/tinywhoop3.git
Adresa repository: https://github.com/Norbi76/tinywhoop3.git
Pentru a putea compila proiectele este necesara instalarea ESP IDF v6.0.2 !! Fiecare dintre cele 2 proiecte se va compila si scrie pe micro separat. Mediul de dezvolatare ESP IDF a fost utilizat pe Linux(Ubuntu).
Pasii pentru compilare si scriere: 1. cd ~/.espressif/v6.0.2/esp-idf 2. . ./export.sh 3. cd tinywhoop3/flightcontroller/ sau cd tinywhoop3/telemetrymodule/ 4. idf.py set-target esp32s3 5. idf.py build flash monitor
Tinywhoop3 bill of materials (BOM)
19 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 2N7002 | SOT-23 | Q1, Q2, Q3, Q4 |
| 1 | ESP_conn1 | PinHeader_1x07_P2.54mm_Vertical | J1 |
| 1 | ESP_conn2 | PinHeader_1x07_P2.54mm_Vertical | J2 |
| 1 | ESP_Unused_Pins1 | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | Batt_conn_MCU | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Batt_conn_LIPO | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | Conn_02x03_Counter_Clockwise | PinSocket_2x03_P2.54mm_Vertical | J6 |
| 4 | 1N4148W | D_SOD-123 | D1, D2, D3, D4 |
| 1 | 10nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 4 | R | R_0805_2012Metric | R1, R2, R3, R4 |
Tinywhoop3 design files
The KiCad project lives in the Norbi76/tinywhoop3 repository on GitHub; these links point at the commit this page was built from.
Tinywhoop3: common questions
How big is the Tinywhoop3 PCB?
The Tinywhoop3 measures 70 × 70 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Tinywhoop3?
19 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Tinywhoop3 design files?
From the Norbi76/tinywhoop3 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Tinywhoop3 design in my own project?
The repository has no license, so all rights stay with Norbi76. Use it as a reference, and ask the author before reusing the design.