WaveGlideNG
About the WaveGlideNG PCB
WaveGlideNG is an open source PCB design by nortd, published on GitHub. It is a 2-layer board measuring 72 × 70 mm, with 20 components from 19 distinct parts.
By type, the board carries 4 resistors and 1 diode.
From the project
An open hardware oxygen system for glider pilots.
WaveGlide Oxygen System ========================
WaveGlide is an automatic oxygen delivery system for glider pilots. It prevents hypoxia at high altitudes by adding oxygen to the inhaled air. Unlike medical constant flow systems it pulses the oxygen supply at the beginning of the breathing cycle and automatically adapts oxygen levels to altitude.
WaveGlideNG bill of materials (BOM)
20 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BAT+ | VALECONN | BATCONN1 |
| 1 | BAT- | VALECONN | BATCONN2 |
| 1 | BMP280 | Pin_Header_Straight_1x07_Pitch2.54mm | BMP280 |
| 1 | PressSensor | DIFFPRESS | DIFFPRESSURE1 |
| 1 | FEATHERBLELONG | PinHeader_1x16_P2.54mm_Vertical | FEATHERBLELONG1 |
| 1 | FEATHERBLESHORT | PinHeader_1x12_P2.54mm_Vertical | FEATHERBLESHORT1 |
| 1 | PIEZOCONN | PIEZO | PIEZOCONN1 |
| 1 | PWRSWITCH | TE_Switch | POWERSWITCH1 |
| 1 | PROBEJACK | DB9HARTING | PROBEJACK1 |
| 1 | STATUSRGB | RGBA_5mm | STATUSRGB1 |
| 2 | VALVECONN | VALECONN | VALVECONN1, VALVECONN2 |
| 1 | VALVESSR | SSR | VALVESSR1 |
| 1 | YS2000PROBE | Pin_Header_Straight_1x05_Pitch2.54mm | YS2000PROBE1 |
| 1 | YS2000UART | Pin_Header_Straight_1x04_Pitch2.54mm | YS2000UART1 |
| 1 | D | D_A-405_P10.16mm_Horizontal | D1 |
| 1 | 120 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 30 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 10 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 360 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
WaveGlideNG design files
The KiCad project lives in the nortd/WaveGlide repository on GitHub; these links point at the commit this page was built from.
WaveGlideNG: common questions
How big is the WaveGlideNG PCB?
The WaveGlideNG measures 72 × 70 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the WaveGlideNG?
20 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the WaveGlideNG design files?
From the nortd/WaveGlide repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the WaveGlideNG design in my own project?
The repository has no license, so all rights stay with nortd. Use it as a reference, and ask the author before reusing the design.
