ESP32-P4X MIPI Camera Sub V1.1
About the ESP32-P4X MIPI Camera Sub V1.1 PCB
ESP32-P4X MIPI Camera Sub V1.1 is an open source PCB design by OHNope, published on GitHub under the Custom license license. It is a 4-layer board measuring 32 × 24 mm, with 30 components from 16 distinct parts.
Other key parts include the ES41140207000000. By type, the board carries 15 capacitors, 8 resistors, 2 ICs, 2 connectors, 1 transistor and 1 crystal.
From the project
The KiCAD project for ESP32-P4_FUNCTION_EV_BOARD_MIPI_Camera_Sub_V1.1_20240529
这是 Espressif 官方开发板 ESP32-P4-Function-EV-Board 的 MIPI 相机转接板（Camera Adapter Board, Camera Sub V1.1, 2024-05-29）的 KiCad 工程。设计版权归 Espressif 所有；本仓库只是把官方 OrCAD/Allegro 设计数据转成 KiCad，并修复了导入过程中出现的问题。
- 开发板用户指南 (v1.5.2)： - 相机转接板原理图 (PDF)： - 相机转接板 PCB 布局 (PDF)： - 官方参考设计包（OrCAD DSN、Allegro BRD、Gerber、BOM、贴片文件）：
KiCad 的 OrCAD .DSN 导入功能目前只在 Nightly (10.99) 里有，正式版要等到 KiCad 11。即使能导入，解析结果和 Board Setup 的映射也有不少问题，导入后直接跑会有大量 ERC/DRC 报错。本工程逐项修正了这些导入问题，电路连接与官方设计保持一致。
Main components on the ESP32-P4X MIPI Camera Sub V1.1
ESP32-P4X MIPI Camera Sub V1.1 bill of materials (BOM)
30 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ES41140207000000 ME6211C18M5G-N 微盟 | SOT23-5 | U1 |
| 1 | ES41140207000000 ME6211C28M5G-N 微盟 | SOT23-5 | U2 |
| 1 | DMN63D8LDW-7 DUAL_NMOS DIODES | SOT-363 | Q3 |
| 1 | 2.1.3.2400037 24MHz MDH | XTAL3225 | Y1 |
| 1 | AFA07-S15FCA-00 FPC_15P_R 钜硕电子 | FFC_15P_1_MIPI_R | J1 |
| 1 | FPC-05F-24PH20 FPC_24P 讯普 | FFC_24P_0P5 | J2 |
| 1 | ES511600400000 NTC013-AT1J-A160T 怡远 | SW4-4P2X3P2X2P5-SMT | SW1 |
| 4 | 10uF/6.3V(20%) | C0603 | C1, C4, C6, C8 |
| 6 | ES110451066200 0.1uF/50V(10%) | C0402 | C2, C5, C7, C9, C11, C15 |
| 1 | ES110451066200 1uF/25V(10%) | C0402 | C3 |
| 1 | ES110451066200 1nF/50V(10%) | C0402 | C10 |
| 1 | ES110451066200 15pF/50V(10%)(NC) | C0402 | C12 |
| 1 | ES110451066200 1uF/25V(10%)(NC) | C0402 | C13 |
| 1 | ES110451066200 0.1uF/50V(10%)(NC) | C0402 | C14 |
| 6 | ES210400000000 10K(1%) | R0402 | R10, R11, R14, R15, R18, R19 |
| 2 | ES210400000000 2.2K(1%) | R0402 | R20, R23 |
ESP32-P4X MIPI Camera Sub V1.1 design files
The KiCad project lives in the OHNope/ESP32-P4X_MIPI_Camera_Sub_V1.1_KiCAD repository on GitHub; these links point at the commit this page was built from.
ESP32-P4X MIPI Camera Sub V1.1: common questions
How big is the ESP32-P4X MIPI Camera Sub V1.1 PCB?
The ESP32-P4X MIPI Camera Sub V1.1 measures 32 × 24 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the ESP32-P4X MIPI Camera Sub V1.1?
30 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ESP32-P4X MIPI Camera Sub V1.1 design files?
From the OHNope/ESP32-P4X_MIPI_Camera_Sub_V1.1_KiCAD repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ESP32-P4X MIPI Camera Sub V1.1 design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.