Pinball Control board
About the Pinball Control board
Pinball Control board is an open source PCB design by Phil-CIA, published on GitHub. It is a 2-layer board measuring 87.1 × 100 mm, with 104 components from 24 distinct parts.
By type, the board carries 34 resistors, 24 diodes, 20 transistors, 20 capacitors, 4 connectors and 2 switches.
From the project
This is code developed for a board replacement with and esp32
This folder contains hardware design files, schematics, PCB layouts, and fabrication exports for Captain Fantastic v2.
Canonical project map and opening policy: - kicad/SOURCEOFTRUTH.md
Structure: - kicad/captaincontrol/: Main control board (ESP32 DevKit) — gameplay, audio, solenoids, headbox lamps, OTA - kicad/captainmatrix/: Switch/lamp matrix board (ESP32 DevKit) — playfield matrix scanning, I2C slave - kicad/7seg_display/: Standalone 7-segment display board (I2C HT16K33, 6-digit)
Pinball Control board bill of materials (BOM)
104 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 10 | BSS138 hongjiacheng | Q_SOT-23 | Q1, Q2, Q3, Q4, Q5, Q7, Q9, Q11 +2 |
| 5 | BSS84 hongjiacheng | Q_SOT-23 | Q6, Q8, Q10, Q12, Q14 |
| 5 | IRFR5410TRPBF IRFR5410 | TO-252-2 | Q16, Q17, Q18, Q19, Q20 |
| 1 | Connector C | CONN_SDA-41792_M450_23_MOL | J1 |
| 1 | B4B-XH-A | JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J3 |
| 2 | Conn_01x10_Pin | PinHeader_1x10_P2.54mm_Vertical | J4, J5 |
| 2 | test switch | Slide Sw LCSC#C7498220 | SW1, SW2 |
| 6 | Red Foshan NationStar Optoelectronics | D_0805 | D1, D21, D22, D23, D24, D25 |
| 1 | Yellow Hubei KENTO Elec | D_0805 | D2 |
| 4 | 1N5819WS Guangdong Hottech | D_SOD-323 | D3, D4, D7, D8 |
| 1 | Green Hubei KENTO Elec | D_0805 | D5 |
| 2 | White Hubei KENTO Elec | D_0805 | D6, D19 |
| 5 | US1M MDD（Microdiode Electronics） | D_SMA | D9, D11, D13, D15, D17 |
| 5 | SMCJ30CA hongjiacheng | D_SMC | D10, D12, D14, D16, D18 |
| 6 | 1uF Samsung Electro-Mechanics | C_0805 | C1, C2, C3, C6, C7, C13 |
| 11 | 100nF YAGEO | C_0805 | C4, C5, C10, C11, C14, C15, C19, C20 +3 |
| 3 | 100uf, 35V | CP_Radial_D6.3mm_P2.50mm | C8, C9, C12 |
| 7 | 2.4kΩ UNI-ROYAL(Uniroyal Elec) | R_0805 | R1, R8, R34, R37, R50, R51, R52 |
| 2 | 680Ω UNI-ROYAL(Uniroyal Elec) | R_0805 | R2, R4 |
| 1 | 4.7Ω UNI-ROYAL(Uniroyal Elec) | R_0805 | R3 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4.7kΩ UNI-ROYAL(Uniroyal Elec) | R_0805 | R5 |
| 17 | 10kΩ UNI-ROYAL(Uniroyal Elec) | R_0805 | R6, R7, R14, R15, R16, R17, R18, R19 +9 |
| 5 | 56Ω UNI-ROYAL(Uniroyal Elec) | R_0805 | R24, R25, R26, R27, R28 |
| 1 | 270Ω UNI-ROYAL(Uniroyal Elec) | R_0805 | R38 |
Pinball Control board design files
The KiCad project lives in the Phil-CIA/Captain-Fantastic-home-edition repository on GitHub; these links point at the commit this page was built from.
Pinball Control board: common questions
How big is the Pinball Control board?
The Pinball Control board measures 87.1 × 100 mm, has 2 copper layers and is 1.67 mm thick.
How many components are on the Pinball Control board?
104 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pinball Control board design files?
From the Phil-CIA/Captain-Fantastic-home-edition repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Pinball Control board design in my own project?
The repository has no license, so all rights stay with Phil-CIA. Use it as a reference, and ask the author before reusing the design.
