Slider my
About the Slider my PCB
Slider my is an open source PCB design by positron48, published on GitHub. It is a 2-layer board measuring 155 × 115 mm, with 23 components from 15 distinct parts.
Other key parts include the MuseLab nanoESP32-C6 v1.0 and MKS TMC2209 V1.0. By type, the board carries 9 connectors, 9 resistors, 3 ICs and 2 capacitors.
From the project
Пользователь изменил размещение и добавил дорожки в kicad/slider.kicadpcb / slider-my.kicadpcb. Не пересобирать PCB генератором.
Пользователь изменил размещение и добавил дорожки в kicad/slider.kicadpcb / slider-my.kicadpcb. Не пересобирать PCB генератором.
2026-09-15 исправлена только схема U2/U3 по изображению пользователя; PCB сохранены побайтно. Распиновка на плате пока старая: требуется обновление из схемы и проверка дорожек. Подробности и таблица выводов. Новые проверки: reports/tmc-pinout-fix/.
Main components on the Slider my
Slider my bill of materials (BOM)
23 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MuseLab nanoESP32-C6 v1.0 | MCU_2x15 | U1 |
| 2 | MKS TMC2209 V1.0 | MKS_TMC2209_V1 | U2, U3 |
| 1 | 12V INPUT | POWER_P7.40 | J1 |
| 1 | MOTOR1 | CONN_4_P2.50 | J2 |
| 1 | MOTOR2 | CONN_4_P2.50 | J3 |
| 1 | ENDSTOP1n3V3 GND S | HDR_3_P2.54 | J4 |
| 1 | ENDSTOP2n3V3 GND S | HDR_3_P2.54 | J5 |
| 1 | ENDSTOP3n3V3 GND S | HDR_3_P2.54 | J6 |
| 1 | DISPLAY GND 3V3 SCL SDA | CONN_4_P2.50 | J7 |
| 1 | KY-040 / 3V3 | HDR_5_P2.54 | J8 |
| 1 | 5V INPUT | POWER_P7.40 | J9 |
| 2 | 220u 35V | CP_Radial_D8.0mm_P3.50mm | C2, C3 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R20 |
| 6 | 10K 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R31, R32, R33, R34, R35, R36 |
| 2 | 4K7 4k7 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R51, R52 |
Slider my design files
The KiCad project lives in the positron48/camera-slider repository on GitHub; these links point at the commit this page was built from.
Slider my: common questions
How big is the Slider my PCB?
The Slider my measures 155 × 115 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Slider my?
23 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Slider my design files?
From the positron48/camera-slider repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Slider my design in my own project?
The repository has no license, so all rights stay with positron48. Use it as a reference, and ask the author before reusing the design.
