Hc solder
About the Hc solder PCB
Hc solder is an open source PCB design by pybash1, published on GitHub. It is a 2-layer board measuring 60 × 50 mm, with 5 components from 4 distinct parts.
By type, the board carries 2 resistors, 1 transistor, 1 battery holder and 1 diode.
From the project
A PCB I made for Hack Club's Solder program!
Hc solder bill of materials (BOM)
5 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BC547 | TO-92L_HandSolder | Q1 |
| 1 | Battery_Cell | BatteryHolder_Keystone_3034_1x20mm | BT1 |
| 1 | LED | LED_D5.0mm | D1 |
| 2 | R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
Hc solder design files
The KiCad project lives in the pybash1/hc-solder repository on GitHub; these links point at the commit this page was built from.
- Layoutsrc/hc_solder.kicad_pcb
- Schematicsrc/hc_solder.kicad_sch
Hc solder: common questions
How big is the Hc solder PCB?
The Hc solder measures 60 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Hc solder?
5 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the Hc solder design files?
From the pybash1/hc-solder repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Hc solder design in my own project?
The repository has no license, so all rights stay with pybash1. Use it as a reference, and ask the author before reusing the design.