I2c-3v3-pullups
About the I2c-3v3-pullups PCB
I2c-3v3-pullups is an open source PCB design by qixuancao, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 30 × 18 mm, with 4 components from 3 distinct parts.
By type, the board carries 2 connectors and 2 resistors.
From the project
Evidence-driven PCB automation for KiCad.
This directory defines three small, low-voltage tutorial requests:
- led-3v3-330r: 3.3 V indicator, 330 ohm 0805 resistor and green 5 mm LED; - rc-1k-100nf: connector-to-connector 1 kohm / 100 nF RC interface; - i2c-3v3-pullups: 3.3 V I2C adapter with two 4.7 kohm pull-ups.
The files under prompts/ are the exact natural-language inputs. They contain no prepared CircuitPlan, reference answer or deterministic fixture result.
I2c-3v3-pullups bill of materials (BOM)
4 components, 3 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TSW-104-07-G-S I2C_IN Samtec | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | TSW-104-07-G-S I2C_OUT Samtec | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 2 | local.r-4k7-0805 4.7k KiCad library generic | R_0805_2012Metric | R1, R2 |
I2c-3v3-pullups design files
The KiCad project lives in the qixuancao/pcbdraft repository on GitHub; these links point at the commit this page was built from.
I2c-3v3-pullups: common questions
How big is the I2c-3v3-pullups PCB?
The I2c-3v3-pullups measures 30 × 18 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the I2c-3v3-pullups?
4 components, from 3 distinct parts. The full bill of materials is listed on this page.
Where can I download the I2c-3v3-pullups design files?
From the qixuancao/pcbdraft repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the I2c-3v3-pullups design in my own project?
Yes, under the terms of its Apache-2.0 license, which qixuancao chose for the repository.
