PassiveMultiples
About the PassiveMultiples PCB
PassiveMultiples is an open source PCB design by schenkzoola, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 15 × 100 mm, with 9 components from 2 distinct parts.
By type, the board carries 8 connectors and 1 switch.
From the project
A 3HP Eurorack passive multiple from Schenktronics. It has two banks of four jacks and a latching pushbutton that links the banks into one 8-jack multiple. It needs no power.
A 3HP Eurorack passive multiple from Schenktronics. It has two banks of four jacks and a latching pushbutton that links the banks into one 8-jack multiple. It needs no power.
- 3HP Eurorack, 15 mm deep, and it needs no power - 2 × 4-jack banks, or 1 × 8 when linked - A latching link button between the banks: in = linked, out = split - The whole kit is through-hole, with 30 solder joints
PassiveMultiples bill of materials (BOM)
9 components, 2 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 8 | AudioJack2_SwitchT QingPu | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CenterHole_OvalPads | J1, J2, J3, J4, J5, J6, J7, J8 |
| 1 | MHPS2285 SW_Push_DPDT APEM | MHPS2285 | SW1 |
PassiveMultiples design files
The KiCad project lives in the schenkzoola/Multiples repository on GitHub; these links point at the commit this page was built from.
PassiveMultiples: common questions
How big is the PassiveMultiples PCB?
The PassiveMultiples measures 15 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PassiveMultiples?
9 components, from 2 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PassiveMultiples design files?
From the schenkzoola/Multiples repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the PassiveMultiples design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.