Dropbot-120-channel pogo pin board.
About the Dropbot-120-channel pogo pin board.
Dropbot-120-channel pogo pin board. is an open source PCB design by sci-bots, published on GitHub under the Custom license license. It is a board measuring 108.3 × 73.3 mm, with 13 components from 7 distinct parts.
Other key parts include the CAT24C02TDI. By type, the board carries 7 connectors, 2 inductors, 2 capacitors, 1 IC and 1 resistor.
From the project
Pogo-pin connector board for the DropBot v3 digital microfluidics platform
The [DropBot v3][dropbot] pogo-pin board routes the high-voltage outputs from the switching boards to a digital microfluidic (DMF) chip via 120 spring-loaded pogo-pins.
For more information, please visit https://sci-bots.com
This design is open-source hardware released under a [Creative Commons Attribution-ShareAlike licence][cc-by-sa].
[dropbot]: https://github.com/sci-bots/dropbot-v3/ [sci-bots]: https://sci-bots.com/ [cc-by-sa]: http://creativecommons.org/licenses/by-sa/3.0
Main components on the Dropbot-120-channel pogo pin board.
Dropbot-120-channel pogo pin board. bill of materials (BOM)
13 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CAT24C02TDI | TSOT-23-5 | U1 |
| 2 | SFM-120-02-L-D-A | SFM-120-02-XXX-D-A | J4, J6 |
| 1 | SFM-125-02-L-D-A | SFM-125-02-XXX-D-A | J5 |
| 4 | Conn_02x17_Odd_Even | Pogo_Pin_Header_Straight_2x17_Pitch2.54mm | P1, P2, P3, P4 |
| 2 | FERRITE | R_0805 | FB1, FB2 |
| 2 | 0.1uF | C_0805 | C1, C2 |
| 1 | 10k | R_0805 | R1 |
Dropbot-120-channel pogo pin board. design files
The KiCad project lives in the sci-bots/dropbot-120-channel-pogo-pin-board.kicad repository on GitHub; these links point at the commit this page was built from.
Dropbot-120-channel pogo pin board.: common questions
How big is the Dropbot-120-channel pogo pin board.?
The Dropbot-120-channel pogo pin board. measures 108.3 × 73.3 mm and is 1.6002 mm thick.
How many components are on the Dropbot-120-channel pogo pin board.?
13 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Dropbot-120-channel pogo pin board. design files?
From the sci-bots/dropbot-120-channel-pogo-pin-board.kicad repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Dropbot-120-channel pogo pin board. design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.