Pnpbadge
About the Pnpbadge PCB
Pnpbadge is an open source PCB design by securelyfitz, published on GitHub. It is a 2-layer board measuring 22 × 28 mm, with 52 components from 4 distinct parts.
By type, the board carries 25 diodes, 25 resistors, 1 battery holder and 1 switch.
It belongs with the wearables designs in this gallery.
From the project
Simple badge for learning to set up and operate a PnP machine
Pnpbadge bill of materials (BOM)
52 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Battery_Cell | BatteryHolder_MPD_BC2003_1x2032 | BT1 |
| 1 | SW_SPDT | SW_SPDT_PCM12 | SW1 |
| 25 | LED | LED_0603_1608Metric | D1.1, D1.2, D1.3, D1.4, D1.5, D2.1, D2.2, D2.3 +17 |
| 25 | R | R_0603_1608Metric | R1.1, R1.2, R1.3, R1.4, R1.5, R2.1, R2.2, R2.3 +17 |
Pnpbadge design files
The KiCad project lives in the securelyfitz/pnpbadge repository on GitHub; these links point at the commit this page was built from.
- Layoutpnpbadge.kicad_pcb
- Schematicpnpbadge.kicad_sch
Pnpbadge: common questions
How big is the Pnpbadge PCB?
The Pnpbadge measures 22 × 28 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pnpbadge?
52 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pnpbadge design files?
From the securelyfitz/pnpbadge repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Pnpbadge design in my own project?
The repository has no license, so all rights stay with securelyfitz. Use it as a reference, and ask the author before reusing the design.
Similar boards
View base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2k
BM28B0.6-24DSBreakout
15.2 × 35.6 mm3 parts2LApache-2.022.2k
LevelShifterBreakout
15.2 × 20.3 mm5 parts2LApache-2.022.2k
View screen
35 × 35 mm12 parts2LApache-2.022.2k
ChainlinkBase
98.4 × 190.5 mm119 parts2LApache-2.04.2k
ChainlinkDriver
198.1 × 30.5 mm58 parts2LApache-2.04.2k