AMDC-Hardware
About the AMDC-Hardware PCB
AMDC-Hardware is an open source PCB design by Severson-Group, published on GitHub. It is a 4-layer board measuring 73.9 × 84.5 mm, with 49 components from 25 distinct parts.
Other key parts include the ADUM130E1BRWZ, INA2143U and 296-43159-1. By type, the board carries 18 test points, 13 capacitors, 4 connectors, 4 resistors, 3 ICs and 3 LEDs.
From the project
Circuit board designs for controlling advanced motor systems
This subfolder houses all the design files for the Analog Encoder Interface board. This board plugs into the AMDC analog inputs via ethernet cables.
Read about the design of this board on docs.amdc.dev.
Main components on the AMDC-Hardware
AMDC-Hardware bill of materials (BOM)
49 components, 25 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ADUM130E1BRWZ INA2143U | D14 | U1 |
| 1 | INA2143U | D14 | U2 |
| 1 | 296-43159-1 LT1764EQ-1.5-PBF | DDPAK-5_Q_LIT | U3 |
| 2 | WM5517 Screw_Terminal_01x06 | TerminalBlock_Phoenix_MKDS-1,5-6_1x06_P5.00mm_Horizontal | J1, J3 |
| 1 | WM5517 1935161 | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J2 |
| 1 | WM5517 RJ45 | RJ45_Amphenol_RJHSE5380 | J4 |
| 1 | RS6-2405S | CONV_RS6-2405S | PS1 |
| 1 | RS6-2415D | CONV_RS6-2415D | PS2 |
| 5 | A106145 TestPoint | TestPoint_Keystone_5000-5004_Miniature | TP1, TP2, TP3, TP4, TP5 |
| 13 | TestPoint | TestPoint_Keystone_5000-5004_Miniature | TP6, TP7, TP8, TP10, TP11, TP12, TP13, TP14 +5 |
| 1 | 3362P-1-103LF | TRIM_3362P-1-103LF | VR1 |
| 2 | RED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | LED1, LED3 |
| 1 | YELLOW | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | LED2 |
| 1 | WE-SL5_HC | WE-SL5_HC | L1 |
| 2 | 311-1341-1 6.8uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2 |
| 2 | 311-1341-1 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4 |
| 3 | 311-4066-1 1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C11, C13 |
| 3 | 311-1085-1 1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6, C10, C12 |
| 1 | 311-4066-1 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7 |
| 1 | 311-1085-1 10 uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 311-4066-1 6.8uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C9 |
| 1 | 311-2.80KHR 70R | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 1 | 311-120HR 3k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 311-2.80KHR 3k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 311-1.20KHR 3k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
AMDC-Hardware design files
The KiCad project lives in the Severson-Group/AMDC-Hardware repository on GitHub; these links point at the commit this page was built from.
AMDC-Hardware: common questions
How big is the AMDC-Hardware PCB?
The AMDC-Hardware measures 73.9 × 84.5 mm, has 4 copper layers and is 1.684 mm thick.
How many components are on the AMDC-Hardware?
49 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the AMDC-Hardware design files?
From the Severson-Group/AMDC-Hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the AMDC-Hardware design in my own project?
The repository has no license, so all rights stay with Severson-Group. Use it as a reference, and ask the author before reusing the design.