Fujinet xebook sd
About the Fujinet xebook sd PCB
Fujinet xebook sd is an open source PCB design by sideburn, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 38 × 47 mm, with 3 components from 3 distinct parts.
By type, the board carries 1 connector and 1 capacitor.
From the project
Full-size push-push SD card daughter board for the FN32ROV-XEBook FujiNet build
A small daughter board carrying a full-size, push-push SD card socket for the FN32ROV-XEBook-KiCad main board, which mounts the FujiNet FN32ROV WiFi/SIO adapter permanently inside an XEBook laptop build.
The main board already has an onboard microSD socket (SD1, Hirose DM3D-SF), soldered directly to the board. This daughter board relocates card access to a side-mounted slot elsewhere in the XEBook case — full-size SD, push-push (insert to lock, push again to eject), MacBook Pro-style — wired in parallel to the same SPI bus over a JST pigtail (see the main board's CLAUDE.md, "External SD card…
Fujinet xebook sd bill of materials (BOM)
3 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C157917 SD_JST | JST_PH_S7B-PH-K_1x07_P2.00mm_Horizontal | J1 |
| 1 | DM1AA-SF-PEJ82 | SD_Hirose_DM1AA_SF_PEJ82 | SD1 |
| 1 | 100NF 100nF | C_0402_1005Metric | C1 |
Fujinet xebook sd design files
The KiCad project lives in the sideburn/fujinet-xebook-sd-kicad repository on GitHub; these links point at the commit this page was built from.
Fujinet xebook sd: common questions
How big is the Fujinet xebook sd PCB?
The Fujinet xebook sd measures 38 × 47 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Fujinet xebook sd?
3 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Fujinet xebook sd design files?
From the sideburn/fujinet-xebook-sd-kicad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Fujinet xebook sd design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which sideburn chose for the repository.