Watch V2 - Pair
About the Watch V2 - Pair PCB
Watch V2 - Pair is an open source PCB design by siemprecollective, published on GitHub under the Unlicense license. It is a 2-layer board measuring 40.4 × 111 mm, with 34 components from 18 distinct parts.
By type, the board carries 12 resistors, 9 diodes, 7 switches, 3 transistors and 3 capacitors.
It belongs with the wearables designs in this gallery.
Watch V2 - Pair bill of materials (BOM)
34 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | Q_PNP_BEC | SOT-23 | Q0, Q1, Q2 |
| 1 | SW_DIP_x01 | SW_SPDT_PCM12 | SW1 |
| 3 | SW_Push | SKRPADE010 | SW-G1, SW-R1, SW-Y1 |
| 3 | SW_Push | SW_SPST_TL3342 | SW-P1, SW-P2, SW-P3 |
| 3 | D | D_SOD-323_HandSoldering | D0, D1, D2 |
| 3 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D3, D4, D5 |
| 3 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D-G1, D-R1, D-Y1 |
| 3 | 1 uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3, C4, C5 |
| 3 | 270 | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R0, R1, R2 |
| 1 | 33k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3 |
| 1 | 16k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R4 |
| 1 | 4.3k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R5 |
| 1 | 62k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R6 |
| 1 | 120k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R7 |
| 1 | 210k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R8 |
| 1 | 43k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R9 |
| 1 | 470 | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R10 |
| 1 | 510 | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R11 |
Watch V2 - Pair design files
The KiCad project lives in the siemprecollective/hardware-watch-pcb repository on GitHub; these links point at the commit this page was built from.
Watch V2 - Pair: common questions
How big is the Watch V2 - Pair PCB?
The Watch V2 - Pair measures 40.4 × 111 mm, has 2 copper layers and is 0.1 mm thick.
How many components are on the Watch V2 - Pair?
34 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the Watch V2 - Pair design files?
From the siemprecollective/hardware-watch-pcb repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Watch V2 - Pair design in my own project?
Yes, under the terms of its Unlicense license, which siemprecollective chose for the repository.
More boards in hardware-watch-pcb
Similar boards
View base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2k
BM28B0.6-24DSBreakout
15.2 × 35.6 mm3 parts2LApache-2.022.2k
LevelShifterBreakout
15.2 × 20.3 mm5 parts2LApache-2.022.2k
View screen
35 × 35 mm12 parts2LApache-2.022.2k
ChainlinkBase
98.4 × 190.5 mm119 parts2LApache-2.04.2k
ChainlinkDriver
198.1 × 30.5 mm58 parts2LApache-2.04.2k