Bicolour light panelized X4

slonket·lego-12v·bicolour_light/hardware/panel/bicolour_light_panelized_X4/bicolour_light_panelized_X4.kicad_pcb

Bicolour light panelized X4 PCB layout, top view — open source board by slonket
Simulate this board

About the Bicolour light panelized X4 PCB

Bicolour light panelized X4 is an open source PCB design by slonket, published on GitHub under the MIT license. It is a 2-layer board measuring 48.2 × 41 mm, with 4 components from 3 distinct parts.

By type, the board carries 2 diodes and 2 resistors.

From the project

An assortment of projects to supplement the Lego 12V "Gray" era trains.

The brick contains two red/yellow bicolour LEDs which change colour with input polarity. This brick is intended for use in locomotives/rolling stock to produce a headlight/tail-light changeover with direction.

- Identical formfactor to the original 2x2 12V light brick (08010bc01). - Version with 3-hole socket. - Colour change red-yellow with input polarity. - Improved brightness over original, particularly in the lower voltage range.

Bicolour light panelized X4, from the project README
From the project README

Bicolour light panelized X4 bill of materials (BOM)

4 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SM4007PL
RED-YEL
D1
1
RED-YEL
D2
2
270
470
R1, R2

Bicolour light panelized X4 design files

The KiCad project lives in the slonket/lego-12v repository on GitHub; these links point at the commit this page was built from.

Bicolour light panelized X4: common questions

How big is the Bicolour light panelized X4 PCB?

The Bicolour light panelized X4 measures 48.2 × 41 mm, has 2 copper layers and is 1 mm thick.

How many components are on the Bicolour light panelized X4?

4 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Bicolour light panelized X4 design files?

From the slonket/lego-12v repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Bicolour light panelized X4 design in my own project?

Yes, under the terms of its MIT license, which slonket chose for the repository.

More boards in lego-12v