PMOD2BNC
About the PMOD2BNC PCB
PMOD2BNC is an open source PCB design by snu-quiqcl, published on GitHub. It is a board, with 1 components from 1 distinct parts.
From the project
QuIQCL PMOD to SMA PCB board
The PMOD2BNC board is a daughter board for the ArtyS7 that converts the PMOD to SMA connectors. Each line is designed with a 50 ohm impedance. It is important to note that only the lengths of the ja and jb lines are matched with an accuracy of 0.254mm. While the jc and jd traces also have a 50 ohm impedance, their delays are not matched. This is due to the output port having a 200 ohm series resistor, which causes high reflection and renders them unsuitable for use in high-speed environments.
PMOD2BNC bill of materials (BOM)
1 components, 1 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PZ254R-12-12P | J1 |
PMOD2BNC design files
The KiCad project lives in the snu-quiqcl/PMOD2BNC repository on GitHub; these links point at the commit this page was built from.
PMOD2BNC: common questions
How many components are on the PMOD2BNC?
1 components, from 1 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PMOD2BNC design files?
From the snu-quiqcl/PMOD2BNC repository on GitHub, which has a netlist and the BOM; the links under Design files point to each one.
Can I use the PMOD2BNC design in my own project?
The repository has no license, so all rights stay with snu-quiqcl. Use it as a reference, and ask the author before reusing the design.