Reste mignon
About the Reste mignon PCB
Reste mignon is an open source PCB design by sporniket, published on GitHub under the CC0-1.0 license. It is a 4-layer board measuring 99.1 × 99.1 mm, with 20 components from 11 distinct parts.
Other key parts include the MC68000_PLCC_68_PHY. By type, the board carries 13 resistors, 2 connectors, 2 jumpers, 2 capacitors and 1 IC.
From the project
REmake of the 'Atari STE' computer, on a smaller PCB ('mignon') –and with a DIP-64 extension Port–
1. What is Sporniket's 'ReSTe mignon', and when to use it ? 2. What should you know before using Sporniket's 'ReSTe mignon' ? 3. How to use Sporniket's 'ReSTe mignon' ? 4. Known issues 5. Miscellanous
Sporniket's 'ReSTe mignon' is a RE-make of the computer known as 'Atari STe', on a B5-sized (250×175 mm) PCB. Smaller, so 'cute', hence 'mignon'.
This is a project made with Kicad. I started this work from the conversion of the original Atari STe schematics.
Main components on the Reste mignon
Reste mignon bill of materials (BOM)
20 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MC68000_PLCC_68_PHY | PLCC-68_THT-Socket | U1 |
| 1 | RESTE_MIGNON_CPU_CONNECTOR_A | PinHeader_2x24_P2.54mm_Vertical | J1 |
| 1 | RESTE_MIGNON_CPU_CONNECTOR_B | PinHeader_2x16_P2.54mm_Vertical | J2 |
| 2 | — | SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1, JP2 |
| 2 | 0.1uF | Passive_THT_capacitor_mlcc_W2.54mm_L5.08mm | C1, C2 |
| 2 | 1K | Passive_THT_resistor_W2.54mm_L10.16mm | R1, R2 |
| 3 | 10K | Passive_THT_resistor_W2.54mm_L10.16mm | R3, R4, R5 |
| 1 | 2K2 | Passive_THT_resistor_W2.54mm_L10.16mm | R6 |
| 1 | 4K7 | Passive_THT_resistor_W2.54mm_L10.16mm | R7 |
| 1 | 8×1K2 | R_Array_SIP9 | RN1 |
| 5 | 8×2K2 | R_Array_SIP9 | RN2, RN3, RN4, RN5, RN6 |
Reste mignon design files
The KiCad project lives in the sporniket/reste-mignon repository on GitHub; these links point at the commit this page was built from.
Reste mignon: common questions
How big is the Reste mignon PCB?
The Reste mignon measures 99.1 × 99.1 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Reste mignon?
20 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Reste mignon design files?
From the sporniket/reste-mignon repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Reste mignon design in my own project?
Yes, under the terms of its CC0-1.0 license, which sporniket chose for the repository.