NinjaHat
About the NinjaHat PCB
NinjaHat is an open source PCB design by StereoNinja, published on GitHub. It is a 2-layer board measuring 85.5 × 56 mm, with 20 components from 18 distinct parts.
Other key parts include the M74VHC1GT125DT1G. By type, the board carries 6 resistors, 4 connectors, 3 capacitors, 2 transistors, 1 IC and 1 switch.
From the project
Stereo Ninja is a digital stereo microscope
Untested first Version for "ninjaHat" PCB Use on your own risk - could create some magic smoke or just not working
Should be pluged on Waveshare's Mini Base Board for Raspberry CM4. See also Mechanical/Cad files for assembly.
Main components on the NinjaHat
NinjaHat bill of materials (BOM)
20 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | M74VHC1GT125DT1G | TSOP-5_1.65x3.05mm_P0.95mm | U1 |
| 1 | Q_PMOS_GSD | SOT-23 | Q1 |
| 1 | BSS138 | SOT-23 | Q2 |
| 1 | DVI-HX-107DIP HDGC or generic china | DVI_Female_74320-9010 | J1 |
| 1 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_GT-USB-7010 | J2 |
| 1 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Conn_02x20_Odd_Even | PinSocket_2x20_P2.54mm_Vertical | P1 |
| 1 | 15p FCC 1mm pitch connetor | TE_1-84952-5_1x15-1MP_P1.0mm_Horizontal | CAM1 |
| 1 | SW_Push | SW_PUSH_6mm | SW1 |
| 1 | D | D_SOD-323 | D1 |
| 1 | Ferrite_Bead_Small | L_0603_min | FB1 |
| 1 | 4u7 | C_0603_min | C1 |
| 2 | 100n | C_0603_min | C2, C3 |
| 2 | 5k1 | R_0603_min | R1, R2 |
| 1 | 100k | R_0603_min | R3 |
| 1 | 10k | R_0603_min | R4 |
| 1 | 1k | R_0603_min | R5 |
| 1 | 10M | R_0603_min | R6 |
NinjaHat design files
The KiCad project lives in the StereoNinja/StereoNinja repository on GitHub; these links point at the commit this page was built from.
NinjaHat: common questions
How big is the NinjaHat PCB?
The NinjaHat measures 85.5 × 56 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the NinjaHat?
20 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the NinjaHat design files?
From the StereoNinja/StereoNinja repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the NinjaHat design in my own project?
The repository has no license, so all rights stay with StereoNinja. Use it as a reference, and ask the author before reusing the design.
