Chromebook debug usb
About the Chromebook debug usb PCB
Chromebook debug usb is an open source PCB design by taki-d, published on GitHub under the MIT license. It is a 2-layer board measuring 20 × 14 mm, with 6 components from 5 distinct parts.
By type, the board carries 4 resistors and 2 connectors.
From the project
KiCad 10のCLIを使い、JLCPCBへアップロードできるGerber、BOM、CPLを生成できます。
KiCad 10のCLIを使い、JLCPCBへアップロードできるGerber、BOM、CPLを生成できます。
CIではGerber出力時にもゾーンを再検査・再充填するため、さらに--check-zonesを指定しています。
- GERBER-chromebookdebugusb.zip - BOM-chromebookdebugusb.csv - CPL-chromebookdebugusb.csv
LCSC部品番号はJLCPCBアセンブリ設定で管理します。CPL X OffsetとCPL Y Offsetは、KiCad CLIが出力するフットプリント原点を、JLCPCB Toolsプラグインが使うパッド群の中心へ合わせる補正値（mm）です。部品やフットプリントを変更した場合は、このCSVも確認してください。未登録または不要になったDesignatorがあると生成処理は失敗します。
Chromebook debug usb bill of materials (BOM)
6 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USB_C_RECEPTACLE_USB2.0_16P USB_C_Receptacle_USB2.0_16P | 918-418K2023S40001 | J1 |
| 1 | C2988370 USB_C_Plug | GT-USB-8013A | J2 |
| 2 | 5.1K 5.1k | R_0603_1608Metric | R1, R2 |
| 1 | 22K 22k | R_0603_1608Metric | R3 |
| 1 | 45.3K 45.3k | R_0603_1608Metric | R4 |
Chromebook debug usb design files
The KiCad project lives in the taki-d/chromebook_debug_usb repository on GitHub; these links point at the commit this page was built from.
Chromebook debug usb: common questions
How big is the Chromebook debug usb PCB?
The Chromebook debug usb measures 20 × 14 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Chromebook debug usb?
6 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Chromebook debug usb design files?
From the taki-d/chromebook_debug_usb repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Chromebook debug usb design in my own project?
Yes, under the terms of its MIT license, which taki-d chose for the repository.