Bissell-Bouten Envelope o-Matic
About the Bissell-Bouten Envelope o-Matic PCB
Bissell-Bouten Envelope o-Matic is an open source PCB design by TimMJN, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 43 × 127 mm, with 22 components from 13 distinct parts.
By type, the board carries 7 resistors, 3 LEDs, 2 connectors and 2 capacitors.
From the project
Kosmo adaptation of the Bissell-Bouten Envelope-o-Matic envelope follower
This is a Kosmo adaptation of the Bissell-Bouten Envelope-o-Matic envelope follower. This repository only contains files for the control board and the front panel. It requires the main circuit board to function, please refer to the original repository of Jos Bouten.
Bissell-Bouten Envelope o-Matic bill of materials (BOM)
22 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | Conn_01x08 | PinSocket_1x08_P2.54mm_Vertical | CN1, CN2 |
| 1 | B200k | Potentiometer_Alpha_9mm_single_gang | CLOCK_SPEED1 |
| 4 | AudioJack | Jack_JST_conn_1x02_P2.50mm | ENV_INV1, ENV_OUT1, GATE_OUT1, SIGNAL_IN1 |
| 1 | SW_SPDT | Switch_SP | FAST_SLOW_ENV1 |
| 2 | B100k | Potentiometer_Alpha_9mm_single_gang | GAIN1, GATE_OFFSET1 |
| 3 | LED | LED_D5.0mm | LED1, LED2, LED3 |
| 1 | 100nF | C_Disc_D6.0mm_W2.5mm_P5.00mm_Value_SilkS | C8 |
| 1 | 470nF | C_Disc_D16.0mm_W5.0mm_P10.00mm | C9 |
| 1 | 1M | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal_Value_SilkS | R1 |
| 1 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal_Value_SilkS | R2 |
| 2 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal_Value_SilkS | R3, R33 |
| 1 | 47k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal_Value_SilkS | R25 |
| 2 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal_Value_SilkS | R28, R29 |
Bissell-Bouten Envelope o-Matic design files
The KiCad project lives in the TimMJN/Bissell-Bouten-Envelope-o-Matic-Kosmo repository on GitHub; these links point at the commit this page was built from.
Bissell-Bouten Envelope o-Matic: common questions
How big is the Bissell-Bouten Envelope o-Matic PCB?
The Bissell-Bouten Envelope o-Matic measures 43 × 127 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Bissell-Bouten Envelope o-Matic?
22 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Bissell-Bouten Envelope o-Matic design files?
From the TimMJN/Bissell-Bouten-Envelope-o-Matic-Kosmo repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Bissell-Bouten Envelope o-Matic design in my own project?
Yes, under the terms of its GPL-3.0 license, which TimMJN chose for the repository.
