Ortho right
About the Ortho right PCB
Ortho right is an open source PCB design by vladkvit, published on GitHub. It is a 2-layer board measuring 189.2 × 146.1 mm, with 70 components from 14 distinct parts.
Other key parts include the EliteC and IS31FL3733-TQ. By type, the board carries 46 relays, 9 connectors, 6 capacitors, 5 resistors, 2 ICs and 1 switch.
It belongs with the keyboards designs in this gallery.
From the project
A split keyboard. Supports QMK, has per-key RGB backlighting
Main components on the Ortho right
Ortho right bill of materials (BOM)
70 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | EliteC | Elite-C-castellated-24pin-holes | U1 |
| 1 | IS31FL3733-TQ | TQFP-48-1EP_7x7mm_P0.5mm_EP5x5mm | U2 |
| 1 | AudioJack4 | TRRS-PJ-320A | J1 |
| 8 | Conn_01x01 | m2.5_hole | J2, J3, J4, J5, J6, J7, J8, J9 |
| 37 | KEYSW_RGB | Hybrid_PCB_100H_hotswap_diode_RGB_rot | K11, K12, K13, K14, K15, K16, K17, K21 +29 |
| 3 | KEYSW_RGB | Hybrid_PCB_150H_hotswap_diode_RGB_rot | K28, K38, K56 |
| 1 | KEYSW_RGB | Hybrid_PCB_225H_hotswap_diode_RGB | K47 |
| 2 | KEYSW_RGB | Hybrid_PCB_200H_hotswap_diode_RGB | K61, K62 |
| 3 | KEYSW_RGB | Hybrid_PCB_125H_hotswap_diode_RGB_rot | K63, K64, K65 |
| 1 | 20K R20k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | Rext1 |
| 1 | SW_PUSH_RESET | SW_Push_1P1T_NO_CK_KMR2 | SW1 |
| 6 | CP | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C3, C4, C5, C6 |
| 3 | 100K R100k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2, R4 |
| 2 | R1k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3, R5 |
Ortho right design files
The KiCad project lives in the vladkvit/orthograph_keyboard repository on GitHub; these links point at the commit this page was built from.
Ortho right: common questions
How big is the Ortho right PCB?
The Ortho right measures 189.2 × 146.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ortho right?
70 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Ortho right design files?
From the vladkvit/orthograph_keyboard repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Ortho right design in my own project?
The repository has no license, so all rights stay with vladkvit. Use it as a reference, and ask the author before reusing the design.
byrantech
google