Stack chan 360Unit-A
About the Stack chan 360Unit-A PCB
Stack chan 360Unit-A is an open source PCB design by washishi, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 40 × 24 mm, with 8 components from 6 distinct parts.
By type, the board carries 5 connectors, 2 capacitors and 1 switch.
From the project
Rotation unit for Takao's SCS0009 version stack chan
2. すでにｽﾀｯｸﾁｬﾝが組みあがっている場合は正面を向いた状態(サーボが中点)で停止します 新規で組み立てる場合も位置を動かしてしまっている場合は中点に合わせてください 3. ｽﾀｯｸﾁｬﾝの足(サーボホーン)のネジを外して取り外します サーボホーンを乗せた状態でガタつかず水平になることを確認します ガタつく場合はサーボホーンの側面(下記写真の赤色部分)を少しやすりで削って足の固定部分と干渉しないようにします 4. 360ユニット 基板B を写真の向きで足にはめます 窪みに合わせてサーボホーンに当たるまで押し込みます はめにくい場合は基板の側面をやすりで少し削ってください 5. サーボの固定ネジ(2本)を取り外しサーボとブラケットの間にスペーサーを入れて再度固定ネジで止めます 組みあがった状態だとサーボのケーブルを一度外す必要があり面倒なので写真のようにスペーサーをニッパーでカットしてしまってもいいです
Stack chan 360Unit-A bill of materials (BOM)
8 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | BAT_CONNECTOR_01X04 BAT_Connector_01x04 | BatteryConector_1.27mm_4P | J1, J2 |
| 1 | HY2.0-4P | NS-Tech_Grove_1x04_P2mm_Vertical | J3 |
| 1 | HY2.0-4P | CON_GROVE_H | J4 |
| 1 | PICOBLADE-4P PicoBlade-4P | Molex_PicoBlade_53047-0410_1x04_P1.25mm_Vertical | J5 |
| 1 | SW_SPDT | SW_Slide-03_Wuerth-WS-SLTV_9x3.5x3.5_P2.54mm | SW1 |
| 2 | 100UF 100uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2 |
Stack chan 360Unit-A design files
The KiCad project lives in the washishi/stack-chan_360unit repository on GitHub; these links point at the commit this page was built from.
Stack chan 360Unit-A: common questions
How big is the Stack chan 360Unit-A PCB?
The Stack chan 360Unit-A measures 40 × 24 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Stack chan 360Unit-A?
8 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Stack chan 360Unit-A design files?
From the washishi/stack-chan_360unit repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Stack chan 360Unit-A design in my own project?
Yes, under the terms of its Apache-2.0 license, which washishi chose for the repository.
