NuV30
About the NuV30 PCB
NuV30 is an open source PCB design by wickerwaka, published on GitHub under the GPL-2.0 license. It is a 2-layer board measuring 95 × 145 mm, with 61 components from 8 distinct parts.
Other key parts include the C7128. By type, the board carries 31 resistors, 18 capacitors, 10 ICs and 2 transistors.
From the project
This is a cycle-accurate FPGA recreation of the NEC V30 (μPD70116), developed and verified against real CPU hardware. A custom board connects the V30 to a DE-10 Nano, allowing the FPGA to drive the CPU inputs and read it's output. A test harness executes sequences of operations u
This is a cycle-accurate FPGA recreation of the NEC V30 (μPD70116), developed and verified against real CPU hardware. A custom board connects the V30 to a DE-10 Nano, allowing the FPGA to drive the CPU inputs and read it's output. A test harness executes sequences of operations under various bus conditions and measures the responses. That information is use to infer internal hardware behavior and turn that into HDL code.
Main components on the NuV30
NuV30 bill of materials (BOM)
61 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | DIP-40_W15.24mm_Socket | U1 |
| 2 | ~ | MODULE_P0496 | U2, U8 |
| 6 | C7128 74ALVC164245 | TSSOP-48_6.1x12.5mm_P0.5mm | U3, U4, U5, U6, U7, U10 |
| 1 | ~ | PLCC-84_THT-Socket | U9 |
| 2 | C10487 SI2301CDS | SOT-23 | Q1, Q2 |
| 15 | C14663 100nF | C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C7, C8 +7 |
| 3 | C15849 1uF | C_0603_1608Metric | C16, C17, C18 |
| 31 | C25804 10k | R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R8 +23 |
NuV30 design files
The KiCad project lives in the wickerwaka/nuV30 repository on GitHub; these links point at the commit this page was built from.
NuV30: common questions
How big is the NuV30 PCB?
The NuV30 measures 95 × 145 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the NuV30?
61 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the NuV30 design files?
From the wickerwaka/nuV30 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the NuV30 design in my own project?
Yes, under the terms of its GPL-2.0 license, which wickerwaka chose for the repository.