FaketecSimple
About the FaketecSimple PCB
FaketecSimple is an open source PCB design by XTR1984, published on GitHub. It is a 2-layer board measuring 25.4 × 50.3 mm, with 8 components from 7 distinct parts.
By type, the board carries 4 connectors, 2 switches and 2 resistors.
From the project
Вариант DIY-платы под Meshtastic Node
Вариант DIY-платы для Mestastic Node - основано на варианте FakeTec v5 (https://github.com/gargomoma/fakeTec_pcb ) - прошивка также берётся от FakeTec - разработано под технологию ЛУТ для однослойного фольгированного стеклотекстолита (с тремя перемычками на обратной стороне) - убрана разводка под LCD, GPS, и ключевые транзисторы - минимальная ширина дорожек 0.3мм - в корпус от Heltec v3 не войдёт - переставлены кнопки - за косяки - ногами не пинать!
FaketecSimple bill of materials (BOM)
8 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Nice!nano - left pins | SMD_Pad_Row_P2.54_13x1 | J1 |
| 1 | Nice!nano - right pins | SMD_Pad_Row_P2.54_13x1 | J2 |
| 1 | Lora - left pins | SMD_Pad_Row_P2.00_8x1_longer | J3 |
| 1 | Lora - right pins | SMD_Pad_Row_P2.00_8x1 | J4 |
| 1 | Reset | SW_Push_SPST_NO_Alps_SKRK | SW1 |
| 1 | SW_Push | SW_Push_SPST_NO_Alps_SKRK | SW2 |
| 2 | 10M | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4, R5 |
FaketecSimple design files
The KiCad project lives in the XTR1984/faketecSimple repository on GitHub; these links point at the commit this page was built from.
- LayoutfakeTecSimple.kicad_pcb
- SchematicfakeTecSimple.kicad_sch
FaketecSimple: common questions
How big is the FaketecSimple PCB?
The FaketecSimple measures 25.4 × 50.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the FaketecSimple?
8 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the FaketecSimple design files?
From the XTR1984/faketecSimple repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the FaketecSimple design in my own project?
The repository has no license, so all rights stay with XTR1984. Use it as a reference, and ask the author before reusing the design.